Couldn't load pickup availability
CALL TO ASK ABOUT FINANCIAL ASSISTANCE
The 1 Package is an all-inclusive Alabama Millwork and Finish Carpentry Contractor exam preparation, licensing, and business setup solution created for contractors who want more than a basic set of reference books. It combines the trade exam references, NASCLA Alabama, 3rd Edition, highlighted and tabbed book preparation, 1 year of course access, Application Service, Business Formation, EIN Filing with the IRS, and Contractor Compliance Guidance in one comprehensive package.
This package is designed to make the path from exam preparation to operating a contracting business feel more manageable. Candidates receive the references used to prepare for the Alabama Millwork and Finish Carpentry Contractor examination together with a study structure focused on open-book testing. The additional licensing and business setup services provide support beyond the examination itself.
The included trade references are the Code of Federal Regulations - 29 CFR Part 1926 (OSHA), Finish Carpenter's Manual by Jim Tolpin, 1993, and The Complete Illustrated Guide to Furniture and Cabinet Construction, 2001. The package also includes NASCLA Alabama, 3rd Edition, highlighted and tabbed.
All books are highlighted and tabbed for exam preparation. For an open-book contractor examination, becoming familiar with the organization of each reference can be an important part of studying. Permanent tabs help candidates move between major topics, while highlighting draws attention to useful information throughout the preparation process.
The package includes 1 year of course access, allowing candidates to develop a structured study routine around fabrication, installation, materials, finishing, hand tools, machines, plans, estimating, safety, and book navigation. Application Service is also included as part of the all-inclusive package.
Beyond exam and licensing preparation, The 1 Package includes services that help establish the business structure needed to operate professionally. Business Formation, EIN Filing with the IRS, and Contractor Compliance Guidance are included to help candidates address important business setup responsibilities while pursuing their Alabama contractor goals.
Please allow up to 15 business days for The 1 Package book orders.
Please allow up to 15 business days for The 1 Package book orders.
The $150 deposit is refundable according to the applicable book rental return terms. The total package amount is $1,995, combining the $1,845 package price with the $150 refundable book deposit.
The Alabama Millwork and Finish Carpentry Contractor examination is administered through PSI as part of the licensing process overseen by the Alabama Licensing Board for General Contractors. Candidates must complete the applicable licensing application process and receive examination eligibility before proceeding with required testing.
The examination covers eight primary subject areas: Fabrication, Installation, Materials, Finishing, Hand Tools, Safety, Machines, and Plans and Estimating.
Fabrication contains 6 questions and is the largest individual section of the examination. Installation contains 5 questions, Materials contains 5 questions, Finishing contains 4 questions, Hand Tools contains 3 questions, Safety contains 3 questions, Machines contains 2 questions, and Plans and Estimating contains 2 questions.
This distribution means candidates need broad trade knowledge rather than focusing on one narrow portion of finish carpentry. Fabrication, installation, and materials make up a substantial portion of the test, but finishing methods, tool knowledge, machine use, safety, plan interpretation, and estimating also deserve dedicated study time.
Alabama's contractor testing requirements also include Business and Law for applicants subject to the state's examination process. NASCLA Alabama, 3rd Edition is included in The 1 Package to support preparation related to Alabama Business and Law requirements.
The Alabama Millwork and Finish Carpentry Contractor examination is an open book test. Approved reference materials may be used during the examination according to PSI's testing rules.
PSI permits approved references to be highlighted, underlined, and indexed. Permanent tabs are allowed. References must otherwise comply with the testing provider's rules and may not contain unauthorized additional material.
All books in The 1 Package are highlighted and tabbed for exam preparation. This preparation can help candidates navigate between major subjects more efficiently during study and when using permitted references during testing.
An open-book examination still requires technical knowledge and time management. Candidates have 90 minutes to complete 30 questions, providing an average of approximately three minutes per question. Searching through an unfamiliar book for every answer can consume valuable testing time.
The goal of open-book preparation should be to understand both the trade and the organization of the references. Safety questions can be researched through 29 CFR Part 1926. Finish Carpenter's Manual provides focused information on finish carpentry techniques, fabrication, installation, tools, materials, and related practical work. The Complete Illustrated Guide to Furniture and Cabinet Construction provides detailed information involving cabinetry, joinery, fabrication, components, materials, and woodworking methods.
Use the highlighted and tabbed books while studying rather than waiting until examination day. Repeatedly locating topics helps candidates remember which reference contains the information and where major subjects are positioned within that reference.
The Alabama Licensing Board for General Contractors oversees the licensing process for contractors performing work within classifications regulated under Alabama general contractor law. Millwork and Finish Carpentry is recognized within Alabama's Building Construction specialty classification structure.
Application Service is included with The 1 Package, adding licensing-related support to the exam preparation and business setup resources contained in the package.
The Alabama Licensing Board for General Contractors regulates covered general contracting and specialty contracting activities. Within Alabama's classification system, Millwork and Finish Carpentry is recognized as a carpentry specialty associated with Building Construction.
The Board classifies contractors according to the types of contracts and work for which they can demonstrate qualification. Applicants requesting classifications are required to document relevant work experience. Current prime contractor application materials require project and work references supporting the classifications being requested.
Alabama's general contractor licensing law applies to covered construction undertakings where the cost of the undertaking, including labor and materials, is $100,000 or more. The current $100,000 threshold became effective October 1, 2024.
The state also regulates subcontractors performing covered work at the applicable statutory threshold. Prime contractors and subcontractors use separate application processes, so applicants should follow the application route corresponding to the role in which they plan to perform contracting work.
Applications received by the Alabama Licensing Board for General Contractors that are subject to examination requirements must complete the applicable Trade exam as well as Business and Law. PSI administers contractor examinations after candidates have obtained the required eligibility.
Book Preparation: All books are highlighted and tabbed for exam preparation.
Order Processing: Please allow up to 15 business days for The 1 Package book orders.
The trade references identified for the Alabama Millwork and Finish Carpentry Contractor examination include:
NASCLA Alabama, 3rd Edition is included separately for Alabama Business and Law preparation.
PSI permits approved reference materials to be highlighted, underlined, indexed, and permanently tabbed. Candidates should become familiar with their prepared references during study so the highlighting and tabs function as practical navigation tools during testing.
The 1 Package includes 1 year of course access, allowing candidates to build a structured preparation routine around both technical subjects and book navigation.
Start with Fabrication because it contains the largest number of trade exam questions. Review layout, measurement, cutting, fitting, joinery, cabinet components, millwork construction, and assembly procedures. Accurate fabrication is fundamental to professional finish carpentry and affects the quality of later installation and finishing work.
Installation and Materials each deserve substantial study. Review fastening, fitting, alignment, cabinet installation, trim installation, and the characteristics of materials commonly used in millwork and cabinet construction.
For Finishing, study surface preparation, finishing procedures, and the relationship between careful preparation and the appearance of completed work. Hand Tools and Machines should be reviewed from both practical and safety perspectives.
Use 29 CFR Part 1926 regularly while preparing for Safety questions. Learn how the OSHA construction standards are organized and practice locating applicable provisions rather than relying only on memorization.
Plans and Estimating preparation should include interpreting dimensions, project information, quantities, and construction details. Finish carpentry often requires accurate translation of project documents into fabrication and installation work.
The highlighted and tabbed books can support faster navigation, while the course structure can help candidates organize their review. Combining the two provides a preparation method that connects trade knowledge with the specific references used for study.
Contractor Exam Prep supports Alabama Millwork and Finish Carpentry Contractor candidates through organized study guidance, trade-focused review, practice-oriented preparation, reference navigation, and a structured approach to contractor licensing preparation.
The included 1 year of course access provides time to review Fabrication, Installation, Materials, Finishing, Hand Tools, Machines, Plans and Estimating, and Safety at a manageable pace. Candidates can work through difficult subjects repeatedly while using the highlighted and tabbed books alongside their preparation.
Reference navigation is especially important for an open-book examination. Candidates can practice identifying which book applies to a question, finding the relevant section, and reviewing supporting information. Repeated use helps build familiarity with the references before testing.
Application Service is included as part of The 1 Package, extending the package beyond study materials and into the licensing process.
Business Formation (LLC or Corporation) is also included to establish the customer's business entity so they are legally structured and ready to operate as a tile and stone contractor in Alabama.
EIN Filing with the IRS is included to obtain the Employer Identification Number used to open business bank accounts, manage taxes properly, hire employees, and operate the contracting business professionally.
Contractor Compliance Guidance provides assistance understanding compliance requirements necessary for Alabama contractors so the business is positioned for long-term success.
The result is an all-inclusive solution built around exam preparation, licensing support, and business setup. Instead of focusing only on the test, The 1 Package provides resources for candidates who want to prepare for the contractor exam while also addressing important steps associated with establishing and operating a contracting business.
The package includes the three trade exam references, NASCLA Alabama, 3rd Edition, highlighted and tabbed book preparation, 1 year of course access, Application Service, Business Formation, EIN Filing with the IRS, and Contractor Compliance Guidance.
The package price is $1,845. A refundable $150 book deposit brings the total to $1,995.
Yes. The $150 book deposit is refundable according to the applicable rental return terms.
The package includes 1 year of course access.
Yes. All books are highlighted and tabbed for exam preparation.
Yes. Application Service is included with The 1 Package.
Yes. Business Formation for an LLC or Corporation is included as part of the business setup services.
Yes. EIN Filing with the IRS is included to obtain an Employer Identification Number for the contracting business.
Yes. The trade examination is open book, and approved references may be used according to PSI's examination rules.
The Millwork and Finish Carpentry Contractor examination contains 30 questions, with 90 minutes allowed for completion.
The minimum passing score is 70%, which equals 21 correct answers out of 30 questions.
Please allow up to 15 business days for The 1 Package book orders.
