Connecticut P-2 Unlimited Journeyperson • PSI • 70 Questions • 150 Minutes
Prepare for the Connecticut Journeyman Plumber Exam with a practical study plan covering the International Plumbing Code, sanitary drainage, venting, water distribution, gas systems, plumbing fixtures, cleanouts, backflow prevention, isometric drawings, water treatment, and jobsite safety.
The official Connecticut license is the P-2 Unlimited Plumbing and Piping Journeyperson credential. It is regulated by the Connecticut Department of Consumer Protection (DCP) and the Plumbing and Piping Work Examining Board.
Connecticut's P-2 trade examination is administered by PSI Services LLC. The current PSI bulletin lists 70 questions with 150 minutes, or two hours and 30 minutes, allowed.
Candidates need a passing score of 70%, meaning at least 49 correct answers on the 70-question examination.
Unlike some states, Connecticut's P-2 test is open book. Candidates are responsible for bringing their own approved reference books to the testing center.
PSI permits approved references to be highlighted, underlined, annotated, and indexed before the examination. Permanent reference tabs are allowed, but temporary sticky-note tabs are not permitted.
You cannot write in the references during the examination. Loose papers and additional inserted materials are also prohibited.
Connecticut P-2 applicants generally need a completed registered apprenticeship or approved equivalent training involving 8,000 hours of on-the-job plumbing experience and 576 classroom hours.
The 2022 Connecticut State Building Code adopts the 2021 International Plumbing Code as part of its model-code framework. PSI's current P-2 bulletin permits the 2015, 2018, or 2021 International Plumbing Code editions, along with other specifically listed references.
Contractor Exam Preps offers the Connecticut Journeyman Plumber Ultimate Exam Prep Package, which includes the 2021 IPC, permanent tabs, a study guide with 750 practice questions, and an online course with plumbing code lessons and simulated examinations.
The Connecticut Journeyman Plumber Exam Prep Package is another option for candidates who want a printed codebook and study guide.
The store also offers a separate Journeyman Plumber Exam Study Guide for additional plumbing math, isometric analysis, code review, and practice questions.
Important licensing distinction: The P-2 credential is a journeyperson license, not an unlimited plumbing contractor license. Connecticut's separate P-1 Unlimited Plumbing Contractor classification requires additional qualification and examination requirements.
This guide explains the official P-2 examination, its sixteen categories, approved exam books, permanent-tab rules, licensing experience, six-week study plan, and the difference between P-2 and P-1 licensing.
Important Connecticut P-2 licensing and exam update: The P-2 Unlimited Journeyperson Plumber exam contains 70 questions, allows 150 minutes, and requires 49 correct answers to pass. It is open book, and you must bring your approved references. PSI allows permanent tabs and highlighting completed before testing but does not permit writing in references during the exam, loose papers, or temporary sticky-note tabs. Connecticut requires 8,000 practical training hours and 576 classroom hours through an approved apprenticeship or equivalent-training process. The P-2 journeyperson credential is separate from the P-1 Unlimited Plumbing Contractor license.
A Connecticut P-2 Journeyperson Plumber is a licensed plumbing professional qualified to perform unlimited plumbing and piping work while employed by a contractor properly licensed for that work.
The official designation is P-2 Unlimited Plumbing and Piping Journeyperson.
The license covers the broad plumbing and piping work defined under Connecticut law, subject to the licensee's employment and other legal requirements.
Typical responsibilities include installing, repairing, replacing, maintaining, and altering domestic water distribution, drainage, waste, venting, gas piping, fixtures, and related plumbing systems.
Plumbers also work with valves, pumps, water heaters, cleanouts, backflow prevention, and other piping components.
A licensed journeyperson must understand how the different parts of a plumbing system work together.
For example, installing a bathroom group involves more than connecting several pipes. The drainage must be sized correctly, the venting must meet code requirements, and the water supply must be able to serve the fixtures.
A small mistake in pipe slope or vent arrangement can create a much larger problem for the building.
That is why Connecticut tests plumbing regulations, drainage, vents, gas systems, fixtures, backflow, and isometric drawings.
Connecticut also requires formal training for P-2 qualification.
The standard training benchmark is 8,000 hours of on-the-job experience plus 576 classroom hours.
Candidates generally qualify through a registered apprenticeship or a DCP-approved equivalent training and experience route.
These two types of training work together. Jobsite experience builds hands-on ability, while classroom instruction explains the technical rules behind the work.
Plumbers preparing for the P-2 examination should be comfortable with both.
The P-2 credential does not provide independent contractor authority.
A P-2 license holder can perform the covered plumbing work only while employed by a properly licensed contractor.
The separate P-1 Unlimited Plumbing Contractor license is intended for those pursuing contractor-level authority.
According to DCP, P-1 qualification generally requires two years as an unlimited licensed journeyperson or equivalent experience and training.
Keeping these two licenses separate is important when selecting study materials or planning to operate a business.
P-2: Unlimited Plumbing and Piping Journeyperson.
State agency: Connecticut Department of Consumer Protection.
Practical training: 8,000 hours.
Classroom training: 576 hours.
Testing provider: PSI.
Contractor credential: Separate P-1 Unlimited Plumbing Contractor license.
Review Connecticut's official plumbing license classifications and scope of work.
Use these steps to organize your apprenticeship history, state application, PSI testing, and final licensing requirements.
| Step | Requirement | What to Verify |
|---|---|---|
| Identify License Class | P-2 | Confirm you need Unlimited Plumbing and Piping Journeyperson. |
| Complete Practical Training | 8,000 Hours | Document qualifying on-the-job plumbing experience. |
| Complete Classroom Training | 576 Hours | Meet the required curriculum and classroom hours. |
| Verify Apprenticeship | Registered Training | Collect proof of apprenticeship completion or the required equivalent records. |
| Prepare Equivalent-Training Records | When Applicable | Supply employer letters and acceptable transcripts as required by DCP. |
| Review Scope of Work | P-2 vs P-1 | Confirm the distinction between journeyperson work and contractor authority. |
| Submit State Application | DCP | Follow Connecticut's current application and eligibility instructions. |
| Receive Examination Eligibility | DCP Review | Wait until the state confirms you are eligible to schedule. |
| Read PSI Bulletin | P-2 Exam Rules | Review question counts, references, time limits, fees, and permitted tabs. |
| Prepare Reference Books | Approved Materials | Bring only references and editions listed by PSI. |
| Schedule PSI Exam | P-2 Trade Exam | Register for Unlimited Journeyperson Plumber. |
| Pass the Exam | 49 Correct | Answer at least 49 of 70 questions correctly. |
| Complete License Issuance | DCP | Follow the passing-score report instructions and submit the required licensing fee. |
The current Connecticut PSI bulletin provides the P-2 examination details, including its sixteen subject categories and approved open-book references.
| Exam Detail | Authority | Current Information |
|---|---|---|
| Official Exam | Connecticut | P-2 Unlimited Journeyperson Plumber |
| Licensing Agency | DCP | Connecticut Department of Consumer Protection |
| Exam Provider | PSI | Computer-based examination |
| Number of Questions | PSI | 70 |
| Exam Time | PSI | 150 minutes |
| Passing Score | PSI | 70%, or 49 correct answers |
| Exam Format | PSI | Open book |
| Reference Books | PSI | Candidate-supplied approved references |
| Approved IPC Editions | PSI | 2015, 2018, or 2021 |
| Permanent Tabs | PSI | Permitted |
| Highlighting Before Exam | PSI | Permitted in approved references |
| Temporary Sticky Tabs | PSI | Not permitted |
| Writing During Exam | PSI | Prohibited in references |
| General Plumbing Regulations | PSI | 4 questions |
| Gas Systems | PSI | 5 questions |
| Cleanouts | PSI | 4 questions |
| Fixtures and Equipment | PSI | 6 questions |
| Water Heaters | PSI | 2 questions |
| Piping, Valves, and Controls | PSI | 3 questions |
| Water Supply | PSI | 5 questions |
| Hangers and Supports | PSI | 4 questions |
| Drain, Waste, and Vent | PSI | 11 questions |
| Backflow | PSI | 3 questions |
| Traps and Interceptors | PSI | 4 questions |
| Developed Length | PSI | 3 questions |
| Isometric Analysis | PSI | 6 questions |
| Joints and Connections | PSI | 4 questions |
| Safety and Excavation | PSI | 3 questions |
| Water Treatment | PSI | 3 questions |
| On-the-Job Training | DCP | 8,000 hours |
| Classroom Training | DCP | 576 hours |
| PSI Exam Fee | PSI | $59 per examination portion in February 2026 bulletin; confirm current fee |
Official P-2 test: 70 questions in 150 minutes.
Passing: 49 correct answers, or 70%.
Largest subject: Drain, Waste, and Vent with 11 questions.
Reference format: Candidate-supplied, approved open-book materials.
License qualification: Completed registered apprenticeship or approved equivalent education and experience.
The official PSI content outline has sixteen categories. Understanding their question counts can help you build a smarter study schedule.
Drain, Waste, and Vent is the largest category with 11 questions. Review sanitary drainage sizing, vent connections, drainage slope, fixture units, building drains, and proper waste system design.
Fixtures and Equipment contains six questions. Study fixture requirements, plumbing connections, clearances, approved equipment, and installation rules.
Isometric Analysis also contains six questions. Candidates should practice reading three-dimensional piping diagrams and tracing waste, vent, and water supply connections.
These three categories total 23 of the 70 exam questions, or approximately 32.9%.
Gas Systems includes five questions involving fuel-gas piping, fittings, sizing, testing, and safety.
Water Supply includes five questions covering water distribution, pipe sizing, valves, pressure, and plumbing supply requirements.
General Plumbing Regulations contains four questions involving broad rules, definitions, and code administration.
Cleanouts contains four questions. Know where cleanouts belong, their accessibility, and common installation rules.
Hangers and Supports includes four questions. Review support spacing, pipe movement, and appropriate installation practices.
Traps and Interceptors includes four questions covering trap seals, proper connections, grease interceptors, and special applications.
Joints and Connections also contains four questions. Understand approved joining methods, fittings, and pipe material limitations.
Piping, Valves, and Controls contains three questions involving system components and their proper use.
Backflow contains three questions. Study cross-connections, air gaps, backflow prevention devices, and protection of potable water.
Developed Length includes three questions requiring attention to pipe routing and measurements.
Safety and Excavation includes three questions. Review trench safety, personal protection, and construction-site hazards.
Water Treatment contains three questions covering water quality and treatment-related equipment.
Water Heaters contains two questions involving heating equipment, installation, and safety requirements.
Every category contributes to the score. Study the larger subjects first, but do not overlook a smaller section. A few extra correct answers can make a very big difference.
Begin by reading the current PSI Candidate Information Bulletin and checking your eligibility for the P-2 examination.
Next, prepare the approved references and organize your study around the official sixteen subject categories.
Drainage, Waste, and Vent: Practice drainage sizing, vent arrangements, fixture units, and code tables.
Fixtures and Equipment: Study fixture installation, minimum requirements, and connection methods.
Isometric Analysis: Practice tracing water, waste, and vent piping in three dimensions.
Gas Systems: Review gas pipe sizing, connections, testing, and the applicable fuel-gas references.
Water Supply: Study sizing, fixture-unit requirements, pressure, and distribution.
Backflow: Learn how air gaps and backflow devices protect potable water.
Traps and Interceptors: Review trap seals, cleanouts, and interceptor applications.
Safety: Study excavation and construction safety under applicable rules.
Developed Length: Practice measuring piping runs and finding correct sizing factors.
Reference Navigation: Use permanent tabs and an index to reduce lookup time.
Practice finding code sections rather than memorizing only the correct answer from a practice test.
For example, if you miss a drainage-sizing question, locate the exact IPC table and work through the reason for the correct size.
The Connecticut Journeyman Ultimate Exam Prep Package includes a study guide with 750 practice questions and an online course with plumbing code lessons.
Remember that the IPC is not the only approved reference in Connecticut's P-2 bulletin. Plan to obtain any additional materials you intend to rely on during the open-book exam.
Connecticut tests Isometric Analysis as well as Drain, Waste, and Vent. The following illustration can help you visualize how fixtures, traps, branches, and vents connect.
Simplified educational diagram. Not a code-approved plumbing design.
Use these eight steps to prepare for the P-2 licensing examination and complete the Connecticut application process.
Review the Unlimited Journeyperson Plumber scope of work and confirm this is the correct trade examination.
Document the 8,000 qualifying on-the-job plumbing hours required for P-2 eligibility.
Obtain proof of 576 hours of qualifying plumbing education and the required curriculum.
Follow the DCP application process for registered apprentices or applicants using equivalent training.
Gather the correct IPC and other PSI-listed references, using permanent tabs and advance highlighting within the rules.
Focus on drainage, fixtures, isometric analysis, gas systems, water supply, and the remaining categories.
Answer at least 49 of the 70 questions correctly within 150 minutes.
Submit the required licensing fee and follow DCP's instructions after passing. Review P-1 requirements if contractor-level licensing is your long-term goal.
The Connecticut P-2 examination contains sixteen subjects totaling 70 questions. These percentages are calculated from the official PSI question counts.
Total: 70 questions.
Largest subject: Drain, Waste, and Vent with 11 questions.
Top three combined: 23 questions, approximately 32.9%.
Five largest subjects: 33 questions, approximately 47.1%.
Study strategy: Give extra time to high-weight subjects, but prepare for all sixteen categories.
The Connecticut P-2 examination is open book. PSI requires candidates to bring their own approved reference materials. The official bulletin lists the following references.
| Reference | Approved Edition | Exam Use |
|---|---|---|
| International Plumbing Code | 2015, 2018, or 2021 | Plumbing regulations, fixtures, drainage, water supply, cleanouts, and venting. |
| NFPA 54 National Fuel Gas Code | 2012 | Fuel-gas systems, piping, appliances, connections, and safety. |
| NFPA 58 Liquefied Petroleum Gas Code | 2014 | LP-Gas equipment, piping, installation, and safety. |
| 29 CFR Part 1926, OSHA Construction Regulations | Latest available amendments | Construction safety, excavation, and related requirements. |
| Water Processing: Residential, Commercial, Light Industrial | 3rd Edition, 2000 | Water quality and treatment. |
| NFPA 56, Fire and Explosion Prevention During Cleaning and Purging of Flammable Gas Piping Systems | Current edition as listed by PSI | Gas-piping cleaning, purging, and safety. |
| Mathematics for Plumbers and Pipefitters | 8th Edition, 2013 | Recommended for study only, not allowed in the testing center. |
| Plumbing Design and Installation | L.V. Ripka / ATP | Recommended for study only, not allowed in the testing center. |
Connecticut code framework: The current 2022 Connecticut State Building Code adopts the 2021 IPC with state amendments.
PSI test reference: The current bulletin permits the 2015, 2018, or 2021 IPC.
Permanent tabs: Allowed under PSI's reference rules.
Highlighting and annotations: Permitted before testing, within the rules.
Additional references: The Connecticut Journeyman Plumber packages from Contractor Exam Preps include IPC-based study materials, but do not list every one of the PSI-approved exam-room references. Obtain additional references separately if needed.
Connecticut allows approved personal references during the P-2 examination. This makes reference preparation a useful part of studying.
However, PSI has specific rules. Permanent tabs and highlighting are allowed before testing, while temporary sticky tabs, loose notes, and writing during the examination are prohibited.
Exam reference responsibility: Candidates bring their own approved books.
Preparation: Permanent tabs, advance highlighting, and permitted annotations can improve navigation.
Forbidden during testing: Writing in references, temporary tabs, and loose supplemental materials.
Time budget: 150 minutes for 70 questions, about 2.14 minutes per question.
A Connecticut P-2 license authorizes unlimited plumbing and piping work as defined by state law, but only while employed by a contractor licensed for that work.
The permitted scope is broad. It includes many systems that carry potable water, waste, gas, and other materials through buildings and related piping networks.
Journeyperson plumbers may install, maintain, repair, replace, and alter plumbing fixtures, piping, fittings, drains, vents, valves, pumps, and connected equipment within their licensed scope.
They may also work with gas piping, water heaters, water distribution, and applicable sanitary or storm piping connections.
Plumbing work affects public health because it helps protect drinking water and remove wastewater safely.
Proper backflow protection is especially important where potable water systems could be exposed to contamination.
Drainage and venting must also be installed correctly so plumbing fixtures operate reliably.
Plumbers need to understand pipe sizing, proper support, approved connections, and inspection requirements.
For example, a commercial renovation might involve several new fixtures, a modified drain, and a different venting arrangement.
The plumber must evaluate how those changes affect the system rather than simply connecting the nearest available pipes.
Work on fuel-gas systems may also involve additional safety requirements and approved installation practices.
Connecticut's P-2 exam includes gas systems, which is why NFPA fuel-gas references appear in the PSI bulletin.
Despite the broad individual plumbing scope, the P-2 journeyperson credential is not the same as a contractor license.
To pursue unlimited plumbing contracting authority, candidates should review the P-1 classification.
DCP describes the P-1 licensing pathway as requiring two years as an unlimited licensed journeyperson or equivalent experience and training.
Unlike the P-2 examination, contractor applicants must also satisfy the relevant Business and Law examination requirement.
Understanding these separate responsibilities is essential for anyone planning to start a plumbing company.
P-2 scope: Unlimited plumbing and piping work within Connecticut law.
Employment condition: Work must be performed while employed by a properly licensed contractor.
P-1 scope: Separate unlimited plumbing contractor license.
Future goal: Consider P-1 licensing if you intend to operate a plumbing contracting business.
| License | Classification | Main Requirement or Purpose |
|---|---|---|
| P-2 | Unlimited Plumbing and Piping Journeyperson | Registered apprenticeship or approved equivalent; 8,000 practical and 576 classroom hours. |
| P-1 | Unlimited Plumbing Contractor | Two years as an unlimited licensed journeyperson or equivalent, with trade and Business and Law examination requirements. |
| J-2 | Limited Well Pumps and Piping Journeyperson | Limited to domestic water pumps and water conditioning. |
| J-4 | Limited Lawn Sprinkler Journeyperson | Limited lawn sprinkler work while employed by a properly licensed contractor. |
| P-6 | Limited Sewer, Storm, and Water Journeyperson | Limited sewer, storm, and water piping work. |
| P-8 | Limited Gasoline Tank, Piping, and Pump Journeyperson | Specialized petroleum tank, piping, and pump work. |
| P-2 PSI Exam | Journeyperson Trade Test | 70 questions, 150 minutes, 49 correct to pass. |
| P-1 PSI Exam | Contractor Trade Test | 80 trade questions, 180 minutes, 70% passing, plus the separate Business and Law exam. |
| Business and Law | Contractor Examination Portion | 50 questions, 120 minutes, 70% passing. Not required for P-2 journeyperson licensing. |
P-2: Journeyperson license, trade exam only.
P-1: Contractor license, with additional experience and examination requirements.
Important: Do not purchase an unrelated limited-plumbing exam package if your application is for P-2.
8,000 Training Hours
576 Classroom Hours • 70 Questions
DCP License and Future P-1 Path
Apprenticeship: Registered completion or acceptable equivalent training.
Hours: 8,000 on-the-job and 576 in the classroom.
Equivalent-experience route: DCP requires acceptable detailed employer letters, proper transcripts, and supporting records.
Contractor licensing: P-1 is a different classification requiring additional qualification.
Use these six weeks to review the IPC, gas references, drainage calculations, isometrics, and timed open-book practice.
The Connecticut P-2 exam is challenging because it tests plumbing code knowledge, trade principles, calculations, and practical problem-solving.
Candidates must answer 70 questions within two hours and 30 minutes.
The passing requirement is 70%, or 49 correct answers.
The exam is open book, which helps candidates use approved references. However, the time limit makes preparation important.
You have an average of about 2.14 minutes per question.
Spending five minutes searching for one answer can leave less time for several other questions.
The largest subject is Drain, Waste, and Vent, with 11 questions.
Fixtures and Equipment and Isometric Analysis each contain six questions.
Gas Systems and Water Supply each contain five questions.
These five categories total 33 questions, almost half the exam.
Candidates should give them special attention during the first weeks of study.
Isometric Analysis can be difficult because it requires interpreting piping drawings, elevations, and connections.
Even experienced plumbers sometimes find three-dimensional drawings harder than the physical pipes they handle every day.
Developed length and plumbing mathematics can also be tricky when several measurements or fixture loads appear in the same question.
Another challenge is managing multiple approved references.
Some questions involve IPC requirements, while others relate to gas systems, construction safety, or water treatment.
Knowing which reference is likely to contain the answer saves valuable time.
Practice using permanent tabs and advance highlighting correctly, but do not depend entirely on marked pages.
Learn the layout of each book, including the table of contents, index, and commonly used tables.
Use timed practice questions to build both speed and confidence.
Review missed answers carefully. Every mistake is a chance to discover a rule you may need on test day.
Good plumbing exam preparation is about recognizing the problem, finding the correct rule, and answering before the clock runs out.
The exam may not be a leaky pipe, but a well-organized toolbox of knowledge still helps.
Exam arrival: PSI recommends arriving 30 minutes before testing.
Identification: Valid government-issued photo identification matching the registration.
References: Bring only materials approved for the P-2 examination.
Calculator: PSI allows a silent, nonprinting, nonprogrammable calculator.
Passing score: 49 correct out of 70.
Contractor Exam Preps offers Connecticut-specific P-2 plumbing study packages as well as general Journeyman Plumber preparation materials.
These packages are based on the 2021 IPC, which is one of the IPC editions listed in Connecticut's current PSI bulletin.
Connecticut P-2 Printed and Online Study
Printed Codebook, Tabs, and Study Guide
750 Plumbing Practice Questions
General ultimate option: The Journeyman Plumber Ultimate Exam Prep Package provides another IPC-based course and study guide combination.
General printed option: The Journeyman Plumber Exam Prep Package includes a 2021 IPC and practice book.
Reference warning: The Connecticut packages do not list every approved P-2 reference book. Confirm and obtain additional PSI-listed references separately.
Before ordering: Verify product contents, current availability, pricing, and examination references.
This Connecticut-specific credential illustration features the state outline, a pipe wrench, water piping, drain and vent connections, plumbing fittings, and water imagery.
It represents P-2 Journeyman Plumber examination preparation. It is not an official Connecticut DCP license or certificate.
• Connecticut Department of Consumer Protection
• Plumbing and Piping Work Examining Board
• P-2 Unlimited Journeyperson Plumber
• PSI State Examination
• 70 Questions
• 150-Minute Examination
• 70% Passing Score
• Open-Book Exam
• 2021 International Plumbing Code
• Approved Permanent Reference Tabs
• 8,000 Practical Training Hours
• 576 Classroom Hours
• Drainage, Waste, and Venting
• Water Supply and Distribution
• Plumbing Fixtures
• Gas Piping
• Cleanouts
• Isometric Analysis
• Backflow Prevention
• Traps and Interceptors
• Developed Length
• Water Heaters
• Water Treatment
• Safety and Excavation
• P-1 Contractor License Distinction
Study the approved references, practice plumbing calculations, and prepare for Connecticut's P-2 examination with a clear weekly study schedule.
Connecticut P-2 Plumbing License Basics
The P-2 Unlimited Plumbing and Piping Journeyperson license.
The Connecticut Department of Consumer Protection, with oversight from the Plumbing and Piping Work Examining Board.
The standard requirement is 8,000 qualifying on-the-job plumbing training hours.
Connecticut requires 576 qualifying classroom hours for P-2 apprenticeship or equivalent-training qualification.
DCP has an equivalent-experience-and-training application route, but applicants must document both the required 8,000 practical hours and 576 qualifying classroom hours.
No. DCP states that work experience cannot replace the required classroom training for the equivalent-training route.
Connecticut PSI P-2 Examination Format
PSI Services LLC administers the P-2 examination.
The official PSI bulletin lists 70 questions.
150 minutes, or two hours and 30 minutes.
70%, which equals 49 correct answers out of 70.
Yes. PSI administers Connecticut occupational licensing examinations through computer testing centers.
No. Connecticut's PSI bulletin states that journeyperson applicants take the trade examination. Contractor applicants must pass both trade and Business and Law portions.
Open-Book References and Tabs
Yes. Candidates may bring approved reference materials listed in the PSI bulletin.
No. Candidates are responsible for bringing their own approved P-2 reference books.
Yes. PSI permits permanent tabs and indexing under the published reference rules.
Yes. Approved references may be highlighted, underlined, and annotated before testing. No writing is allowed during the examination.
No. PSI prohibits temporary tabs and loose inserted paper.
The current P-2 PSI bulletin permits the 2015, 2018, or 2021 International Plumbing Code.
The 2022 Connecticut State Building Code is currently listed as effective and is based on the 2021 International Codes, including the 2021 IPC.
No. PSI also lists NFPA 54, NFPA 58, OSHA construction regulations, Water Processing, and NFPA 56 among approved references.
PSI permits a silent, nonprinting, nonprogrammable calculator.
Official P-2 Plumbing Exam Topics
Drain, Waste, and Vent, with 11 questions.
Six questions.
Yes. Gas Systems includes five questions.
Five questions.
Yes. Fixtures and Equipment contains six questions.
Yes. Developed Length accounts for three questions.
Yes. Safety and Excavation includes three questions.
Yes. Backflow includes three questions, and Water Treatment also includes three.
Journeyperson and Contractor Licensing
No. The P-2 license authorizes covered plumbing work only while employed by a contractor licensed for that work.
The P-1 Unlimited Plumbing Contractor license, subject to Connecticut's additional licensing requirements.
DCP generally requires two years as an unlimited licensed journeyperson or equivalent experience and training to qualify for the P-1 examination.
Yes. Contractor applicants must pass the trade examination and a separate Business and Law portion.
Contractor Exam Preps Study Products
Yes. The store offers Connecticut Journeyman Plumber Exam Prep and Ultimate Exam Prep packages based on the 2021 IPC.
A 2021 IPC, permanent reference tabs, a Journeyman Plumber Study Guide, and an online course with videos and simulated exams.
The listed Journeyman Plumber Study Guide includes 750 practice questions with answer keys.
No. The listed Connecticut packages include IPC-based materials but do not list the complete set of approved gas, safety, and water treatment references.
No. Study products support exam preparation but cannot guarantee passing the examination or receiving a state license.
This related 1 Exam Prep video introduces the International Plumbing Code, including plumbing fixtures, sanitary drainage, venting, water distribution, piping materials, and codebook navigation. These topics are useful for Connecticut P-2 candidates preparing for their open-book licensing exam.
Video: International Plumbing Code Overview, Course Preview.
Channel: 1 Exam Prep.
Related topics: IPC organization, fixtures, drainage, venting, water supply, and open-book code navigation.
Connecticut reminder: The P-2 exam is 70 questions in 150 minutes with a 70% passing requirement.
Approved reference rules: Use only PSI-listed books and follow the permanent-tab and annotation requirements.
Watch the 1 Exam Prep International Plumbing Code Video on YouTube
Use Contractor Exam Preps for Connecticut-specific plumbing study materials, IPC references, practice questions, and online instruction. Use DCP and PSI to confirm official licensing and examination requirements.
Connecticut license: P-2 Unlimited Plumbing and Piping Journeyperson.
Examination: 70 questions, 150 minutes, 49 correct to pass.
Format: Open book, with candidate-supplied approved references.
Reference preparation: Permanent tabs and advance highlighting are allowed under PSI rules.
Practical training: 8,000 hours.
Classroom education: 576 hours.
Contractor authority: Separate P-1 Unlimited Plumbing Contractor license.
Prepare for Connecticut's P-2 Unlimited Journeyperson Plumber examination with stronger knowledge of the International Plumbing Code, drainage, venting, gas systems, water supply, fixtures, backflow prevention, and isometric drawings.
The official PSI examination includes 70 questions and allows 150 minutes.
Candidates must answer at least 49 questions correctly to meet the 70% passing standard.
Connecticut's P-2 exam is open book, so approved reference preparation is important.
You are responsible for bringing the approved books to the testing center.
PSI permits permanent tabs and highlighting completed before testing. Temporary tabs, loose notes, and writing in references during the examination are prohibited.
The largest exam subject is Drain, Waste, and Vent, with 11 questions.
Fixtures and Equipment and Isometric Analysis each contain six questions, while Gas Systems and Water Supply each contain five.
These five categories account for 33 of the 70 questions.
Study them carefully, but prepare for all sixteen official subjects.
The Connecticut Journeyman Plumber Ultimate Exam Prep Package offers 2021 IPC study materials, permanent tabs, a guide with 750 practice questions, and an online course.
A printed Connecticut Journeyman Plumber Exam Prep Package is also available.
Remember to review the official PSI bulletin because additional approved references cover gas safety, construction safety, and water treatment.
Beyond testing, Connecticut P-2 candidates must satisfy their apprenticeship or equivalent-training requirements involving 8,000 practical hours and 576 classroom hours.
The P-2 license allows broad plumbing and piping work while employed by a properly licensed contractor.
If you want to operate an unlimited plumbing contracting business, the separate P-1 licensing pathway is the next classification to explore.
Build a realistic study schedule, practice open-book reference navigation, work through isometric drawings, and review every missed question.
Good preparation means knowing where to find the correct plumbing rule and understanding how to apply it under time pressure.
Find additional plumbing licensing and contractor exam preparation at ContractorExamPreps.com.
