Mississippi Specialty Contractor • MSBOC • PSI • 60 Questions • 120 Minutes • 70% Passing • Open Book
Ready to earn your Mississippi Roofing, Sheet Metal and Siding Contractor license? This guide explains the official contractor classification, PSI examination, licensing process, approved reference books, technical exam subjects, and related products from Contractor Exam Preps.
The Mississippi Roofing, Sheet Metal and Siding license is a specialty contractor classification regulated by the Mississippi State Board of Contractors, commonly called MSBOC.
It covers professional work involving roofing systems, sheet metal components, siding installations, and related exterior building protection.
That includes roofing installation, maintenance, repair, alteration, waterproofing, and certain work performed to stop leaks or extend a roof's service life.
The classification also covers related roof-deck attachments and repair or replacement of roof sheathing or fascia as needed during roofing work.
Sheet metal work may involve flashing, gutters, cornices, leaders, downspouts, and metal pans.
Siding work may involve aluminum, vinyl, and other exterior cladding materials, including fascia, soffit, and associated installation details.
In simple terms, this contractor helps protect the outside of a building from the weather.
And in Mississippi, weather does not always ask politely before showing up!
The official Mississippi contractor classification list identifies Roofing, Sheet Metal and Siding as a tested specialty classification.
Applicants normally begin by submitting the appropriate commercial contractor application to MSBOC.
The Board reviews the application and determines whether the qualifying party is eligible to take the required examinations.
Only after MSBOC establishes eligibility can the applicant schedule the examination through PSI.
The Mississippi Roofing, Sheet Metal and Siding trade examination contains 60 questions.
Candidates receive two hours, or 120 minutes, to complete the exam.
The passing score is 70%.
That means applicants must correctly answer at least 42 of the 60 scored questions.
The examination is open book.
However, candidates must use only the reference materials allowed by PSI.
Permitted reference books may be inspected before the candidate enters the examination room.
Permanent tabs, highlighting, and underlining are generally permitted under the published rules.
Temporary tabs, loose papers, removable notes, and unauthorized inserts are not permitted.
The ability to find information quickly inside the approved books is an important part of passing.
After all, 120 minutes for 60 questions leaves an average of just two minutes per question.
That is enough time for a focused code search, but not enough time to read an entire roofing manual from the beginning.
The exam contains eight major subject areas.
Steep roofing is the largest category, with 17 questions.
This section focuses on steep-slope roof systems, materials, installation details, underlayment, flashing, and related construction practices.
Roofing substrates account for eight questions.
Substrate questions can involve roof decks, sheathing, preparation, attachment, existing conditions, and support requirements.
General siding knowledge also accounts for eight questions.
That includes siding materials, installation, fastening, soffits, fascia, accessories, and moisture management.
Elastomeric roofing accounts for seven questions.
Candidates should study the materials, components, applications, and installation practices associated with these systems.
Built-up bituminous roofing also accounts for seven questions.
These subjects may involve roofing plies, bituminous materials, surfacing, system construction, and repair.
Safety accounts for six questions.
Safety questions may involve OSHA construction standards, fall protection, ladders, scaffolding, personal protective equipment, and jobsite hazards.
Roofing repairs account for four questions.
These may involve roof inspections, leak identification, replacement work, repairs, patching, and waterproofing details.
Sheet metal and flashing account for three questions.
While this is a smaller category, it is still important because flashing and sheet metal components help direct water away from vulnerable building areas.
The exam's eight published categories total 60 scored questions.
Understanding these exact topic counts can help applicants build a useful study schedule.
Instead of dividing study time evenly across every topic, begin with the largest tested areas.
That means steep roofing deserves special attention.
But do not ignore the smaller sections.
Missing several questions about flashing, repairs, or safety can still affect the final result.
Contractor Exam Preps offers the Mississippi Roofing, Sheet Metal and Siding Contractor Book Package.
This package includes eight technical references listed for the PSI trade examination.
The books cover steep-slope roofing, metal panel systems, spray polyurethane foam roofing, membrane roofing, OSHA safety, PVC siding and soffit installation, roofing estimating, carpentry, and building-code requirements.
These subjects match the scope of the Mississippi specialty contractor trade examination.
Candidates who prefer digital learning can explore the Mississippi Roofing, Sheet Metal and Siding Online Exam Prep Course.
The online course focuses on examination subjects, practice questions, and strategies for navigating approved references.
For candidates interested in a package that includes prepared books and licensing application support, Contractor Exam Preps offers the Mississippi Roofing, Sheet Metal and Siding Ultimate Exam Prep Rental Package.
That package includes nine rental references, one year of course access, and Application Service.
The nine books include eight trade references plus the Mississippi NASCLA Business, Law and Project Management guide.
Books in that rental package are professionally highlighted and permanently tabbed to support open-book study.
The package also uses a refundable rental-book deposit, subject to the store's return conditions.
Contractor Exam Preps offers a larger All-Inclusive Mississippi Roofing, Sheet Metal and Siding Contractor Package.
This package combines exam preparation, rental references, Application Service, business formation assistance, EIN filing, and contractor compliance guidance.
These services may be useful for contractors who want help organizing both their examination preparation and the early business setup process.
Applicants must remember that purchasing a preparation package does not issue a contractor license.
The Mississippi State Board of Contractors remains responsible for determining eligibility, approving the license classification, and issuing the contractor license.
Beyond the trade examination, Mississippi normally requires the Law and Business Management examination.
This exam addresses subjects such as licensing regulations, contracts, business organization, financial management, project management, employment responsibilities, and risk management.
The Mississippi-specific NASCLA Contractor's Guide to Business, Law and Project Management, Mississippi, 6th Edition is an important reference for this portion of the licensing process.
Contractor Exam Preps also offers Mississippi PSI Law and Business Management Online Practice Questions.
Applicants should prepare for both their assigned trade examination and the Law and Business test required by the Board.
Mississippi contractor licensing also depends on the project type and contract value.
Under the published MSBOC licensing guidance, commercial contractor licensing is generally required for commercial projects over $50,000.
Residential roofing work over $10,000 also triggers state licensing requirements.
However, Mississippi has a separate Residential Roofer license classification.
Do not assume that the commercial Roofing, Sheet Metal and Siding examination and the Residential Roofer examination are identical.
Each classification has its own scope and testing requirements.
The Board determines which license is appropriate for the applicant's planned work.
Contractors should also understand the importance of permit compliance, contracts, proper business records, employee safety, and insurance documentation.
The licensing process does not end when a candidate receives a passing exam score.
The Board must still approve the complete application.
The qualifying party must also maintain the required relationship with the licensed business.
Mississippi contractor licenses are generally valid for one year and must be renewed annually.
New applicants usually have a six-month examination eligibility period after approval.
Applicants who do not complete the required testing within that period may need to reapply to the Board.
That is another reason to organize the books and study schedule before scheduling an examination date.
For study, begin with steep roofing systems and roofing substrates.
Then move into membrane roofing, elastomeric roofing, built-up roofing, siding, and flashing.
Review OSHA safety throughout the study process rather than saving it all for the final day.
Practice construction mathematics, roof-area calculations, material estimating, and slope calculations.
Learn how to match a question to the correct book.
For example, a fall protection question belongs in the OSHA reference.
A PVC siding fastening question points toward ASTM D4756.
A roof assembly question may require the International Building Code or the appropriate NRCA manual.
Knowing where to look reduces time spent flipping through unrelated pages.
The most effective Mississippi Roofing, Sheet Metal and Siding Contractor exam preparation combines technical knowledge, approved references, timed practice, and a clear understanding of the licensing process.
This guide covers the exact PSI exam topics, the Mississippi licensing roadmap, approved books, study strategies, roofing construction diagrams, Contractor Exam Preps products, interactive FAQs, and a related 1ExamPrep YouTube video.
Important Mississippi Roofing Contractor 2026 Update: The Mississippi Roofing, Sheet Metal and Siding specialty trade examination contains 60 scored questions, allows 120 minutes, and requires a passing score of 70%, or 42 correct answers. The examination is administered by PSI after MSBOC approves the applicant's eligibility. Steep roofing is the largest subject, with 17 questions. The examination is open book and uses eight approved technical references, including the 2025 NRCA Steep Slope Roofing Manual, 2024 NRCA Metal Panel and SPF Manual, 2023 NRCA Membrane Roofing Manual, and 2021 International Building Code. Applicants generally must also pass the separate Mississippi Law and Business Management examination. Verify all testing instructions against the current PSI Candidate Information Bulletin before your appointment.
A Mississippi Roofing, Sheet Metal and Siding Contractor is a specialty contractor licensed by the Mississippi State Board of Contractors.
The classification covers professional work on roofing systems, sheet metal components, and exterior siding assemblies.
It includes installation, maintenance, repair, and alteration.
Roofing work may involve applying new roof coverings, repairing damaged systems, installing waterproofing materials, sealing leaks, and replacing portions of roof sheathing or fascia when necessary for roofing repairs.
Sheet metal work may include flashings, cornices, gutters, leaders, downspouts, pans, and related weather-protection components.
Siding work may involve installing aluminum, vinyl, and other approved siding materials.
It may also involve soffits, fascia, and related exterior details within the classification's scope.
The contractor must understand how these separate building components work together to protect the structure.
For example, even a correctly installed roof covering can develop problems if flashing is installed incorrectly.
Gutters and downspouts must also direct water away from vulnerable areas.
Siding and soffits must be installed with proper fastening, clearances, and moisture-management details.
Roofing, siding, and sheet metal are different trades, but they all help maintain the building envelope.
The MSBOC classification covers the specified work, while the Board retains final authority over questions about permitted scope.
Official classification: Roofing, Sheet Metal and Siding.
Licensing authority: Mississippi State Board of Contractors.
Exam provider: PSI.
Exam: 60 questions, two hours, 70% passing.
Scope: Roofing, exterior sheet metal, siding, fascia, soffit, and related work.
| Step | Requirement | What to Prepare |
|---|---|---|
| State | Mississippi | Confirm the location and type of construction work. |
| Classification | Roofing, Sheet Metal and Siding | Select the correct MSBOC specialty classification. |
| Licensing Authority | MSBOC | Review current application instructions. |
| Exam Administrator | PSI | Wait for eligibility before scheduling. |
| Commercial Licensing Threshold | Generally Over $50,000 | Confirm the project type and state licensing rules. |
| Residential Roofing Threshold | Generally Over $10,000 | Review the separate Residential Roofer classification. |
| Contractor Application | Required | Submit the applicable business information. |
| Business Name | Required | Use the legal name approved for licensure. |
| Business Entity | As Applicable | Document company registration. |
| Qualifying Party | Required | Identify the person meeting examination requirements. |
| Financial Information | Per License Type | Submit documents currently required by MSBOC. |
| Insurance Information | Per License Type | Review liability and workers' compensation requirements. |
| Board Application Review | Required | Respond to missing-document requests. |
| Examination Eligibility | MSBOC Approval | Wait for PSI confirmation. |
| PSI Registration | After Eligibility | Schedule your examination appointment. |
| Trade Examination | 60 Questions | Review the eight PSI technical domains. |
| Trade Exam Duration | 120 Minutes | Practice two-minute question pacing. |
| Trade Passing Score | 70% | Answer at least 42 questions correctly. |
| Trade Exam Format | Open Book | Use authorized references only. |
| Approved References | Eight Technical Books | Match the PSI bulletin editions. |
| Law and Business Exam | Normally Required | Study contractor business and legal responsibilities. |
| Law and Business Questions | 50 | Review the published separate exam outline. |
| Law and Business Time | 120 Minutes | Prepare separately from the trade exam. |
| Law and Business Passing | 70% | Aim for at least 35 correct answers. |
| Business and Law Reference | Mississippi NASCLA 6th Edition | Study the appropriate approved business guide. |
| New Applicant Eligibility | Generally Six Months | Finish required testing within the eligibility period. |
| Exam Retakes | PSI Rules Apply | Follow current retake instructions. |
| Final Board Review | Required | Complete all remaining licensing items. |
| License Validity | One Year | Track the license expiration date. |
| License Renewal | Annually | Renew on time through MSBOC. |
| Classification Limits | Board Determination | Do only work covered by the approved license. |
The Mississippi Roofing, Sheet Metal and Siding trade test is a specialty contractor examination administered by PSI following eligibility approval from MSBOC.
| Exam Detail | Category | Published Information |
|---|---|---|
| Exam Title | Classification | Roofing, Sheet Metal and Siding |
| State | Authority | Mississippi |
| Licensing Board | Authority | MSBOC |
| Exam Provider | Testing | PSI |
| Exam Questions | Testing | 60 |
| Time Allowed | Testing | 120 Minutes |
| Passing Score | Testing | 70% |
| Correct Answers Needed | Testing | 42 |
| Average Time Per Question | Study Planning | Two Minutes |
| Exam Format | Testing | Computer-Based, Open Book |
| Eligibility Approval | Testing | MSBOC Required |
| Temporary Reference Tabs | Books | Not Permitted |
| Permanent Reference Tabs | Books | Permitted Under PSI Conditions |
| Highlighting | Books | Permitted Before Exam Under PSI Rules |
| Loose Papers | Books | Not Permitted |
| Steep Roofing | Trade Topic | 17 Questions |
| Roofing Substrate | Trade Topic | 8 Questions |
| Siding General Knowledge | Trade Topic | 8 Questions |
| Elastomeric Roofing | Trade Topic | 7 Questions |
| Built-Up Bituminous Roofing | Trade Topic | 7 Questions |
| Safety | Trade Topic | 6 Questions |
| Roofing Repairs | Trade Topic | 4 Questions |
| Sheet Metal and Flashing | Trade Topic | 3 Questions |
| Steep Roofing Share | Blueprint | Approximately 28.3% |
| Approved Trade References | Books | Eight Listed Technical References |
| Building Code Reference | Books | 2021 International Building Code |
| Steep Roofing Reference | Books | NRCA 2025 Manual |
| Metal Panel and SPF Reference | Books | NRCA 2024 Manual |
| Membrane Roofing Reference | Books | NRCA 2023 Manual |
| OSHA Reference | Books | 29 CFR Part 1926 |
| Siding Reference | Books | ASTM D4756 |
| Construction Reference | Books | Carpentry and Building Construction |
| Estimating Reference | Books | Roofing Construction and Estimating |
| Business and Law Exam | Licensing | Separate Examination Normally Required |
| Business and Law Questions | Testing | 50 |
| Business and Law Time | Testing | 120 Minutes |
| Business and Law Passing | Testing | 70% |
| Exam Eligibility Period | Testing | Generally Six Months |
| License Renewal | Licensing | Annually |
Trade exam: 60 questions.
Time: 120 minutes.
Passing score: 70%, or 42 correct answers.
Largest category: Steep roofing, 17 questions.
Separate requirement: Mississippi Business and Law examination, unless an applicable waiver is confirmed by MSBOC.
The PSI examination covers eight technical subject areas. The published question counts help candidates identify the topics that deserve the most attention.
Steep roofing is the largest examination category.
Review asphalt shingles, underlayments, steep-slope systems, flashing, valleys, roof penetrations, ventilation, attachment methods, and recognized roofing practices.
Study how roof slope and material selection affect installation details.
Use the NRCA Roofing Manual for Steep Slope Roof Systems as a primary reference.
Roofing substrates support roofing materials and affect system performance.
Review roof decks, sheathing, existing roof conditions, surface preparation, attachment, moisture damage, and repair considerations.
Study how the condition of the substrate influences the roofing installation.
Review vinyl and other exterior siding materials, soffits, fascia, fasteners, trim, clearances, and moisture management.
The ASTM D4756 standard supports preparation for rigid PVC siding and soffit installation.
Study elastomeric and membrane-based roofing systems, including their materials, attachment methods, flashing details, and maintenance considerations.
Learn how different low-slope systems handle waterproofing and movement.
Built-up roofing uses multiple layers to create a weather-resistant roof assembly.
Review bituminous materials, reinforcement, surfacing, installation processes, and repair practices.
Review OSHA construction safety under 29 CFR Part 1926.
Important subjects include fall protection, ladders, scaffolds, personal protective equipment, tools, material handling, and jobsite hazards.
Study leak identification, damaged roofing materials, roof inspections, repair methods, reroofing, flashing repairs, and substrate correction.
Understand the difference between correcting the source of water entry and simply covering a visible stain.
Review metal flashing, gutters, roof edges, downspouts, leaders, pans, and weather-protection transitions.
Understand how correct detailing directs water away from vulnerable building components.
Total: 60 scored questions.
Major study priority: Steep roofing.
Additional priorities: Substrates, siding, elastomeric roofing, built-up roofing, safety, repairs, and flashing.
Source of exam topic counts: Current published PSI examination outline.
Begin by reviewing the current PSI Candidate Information Bulletin and the MSBOC licensing requirements.
Confirm that you are preparing for the correct specialty classification.
Then organize the eight approved technical references.
Steep roofing should be the first major study subject because it accounts for 17 questions.
Review the NRCA Steep Slope Roofing Manual and become familiar with roofing materials, assemblies, underlayments, flashing, valleys, roof penetrations, and ventilation.
Next, focus on roofing substrates.
Learn how decks, sheathing, existing conditions, and attachment methods affect roofing installation.
Then study siding systems and the ASTM D4756 standard.
Review preparation, fastening, soffit details, expansion allowances, accessories, and weather protection.
Set aside separate time for low-slope roofing.
Study membrane roofing, elastomeric systems, built-up bituminous roofing, and related installation methods.
Compare roofing systems rather than treating every type of roof as identical.
Metal panel roofing and spray polyurethane foam systems have different installation details from asphalt shingles or built-up roof assemblies.
Safety should be studied every week.
Review OSHA fall protection, ladders, scaffolds, equipment safety, and common jobsite hazards.
Use the Roofing Construction and Estimating reference to practice material quantities, project measurements, labor planning, and roofing terminology.
Read the 2021 International Building Code sections related to roofs, exterior walls, materials, and weather protection.
Most importantly, practice locating answers in the correct reference.
With only two minutes per question, searching the wrong manual can cost valuable time.
The Mississippi Roofing, Sheet Metal and Siding Online Course supports structured practice and reference navigation.
Use practice examinations to identify weak subjects and improve pacing.
Reserve dedicated study time for the separate Mississippi Business and Law examination.
First priority: Steep roofing, 17 questions.
Second priorities: Roofing substrates and siding, eight questions each.
Next subjects: Membrane systems, built-up roofing, safety, repairs, and sheet metal.
Open-book strategy: Use the correct approved reference and practice two-minute pacing.
Separate preparation: Mississippi Business and Law Management.
Roofing contractors should understand how roof coverings, underlayment, decking, flashing, gutters, fascia, and siding work together.
The educational diagram below connects several exam subjects within one exterior construction assembly.
Simplified educational illustration only. Not a complete engineered construction detail or code-approved installation drawing.
Confirm whether Roofing, Sheet Metal and Siding matches the work your company plans to perform.
Gather the required company, business, financial, and insurance information for the appropriate license type.
Designate the person who will satisfy the Board's examination requirements and maintain the required business relationship.
MSBOC reviews eligibility and sends approved candidate information to PSI.
Review the current PSI list, study the correct editions, and add permitted permanent tabs.
Prepare for roofing, siding, sheet metal, safety, estimating, and the separate Mississippi Business and Law examination.
Complete the 60-question trade exam in 120 minutes and meet all other assigned testing requirements.
Finish any outstanding Board requirements, receive the approved license, and renew it annually.
Unlike general study recommendations, the following percentages are calculated directly from the current published PSI trade exam question counts.
The exam contains 60 scored questions across eight subject categories.
Total: 60 scored questions, representing 100% of the trade exam.
Largest category: Steep roofing, approximately 28.3%.
Passing requirement: 42 correct answers.
Time limit: Two hours.
Note: Bars represent each category's share of the full 60-question examination.
The Mississippi Roofing, Sheet Metal and Siding examination is open book, but candidates must use references authorized by PSI.
The following eight technical books are listed for the trade examination. Always confirm the current editions in the bulletin before the exam.
| Reference Book | Edition | Main Study Purpose |
|---|---|---|
| NRCA Roofing Manual: Steep Slope Roof Systems | 2025 | Shingles, underlayment, flashing, valleys, penetrations, roof details, and steep roofing installation. |
| NRCA Roofing Manual: Metal Panel and SPF Roof Systems | 2024 | Metal panel roof systems, spray polyurethane foam, attachments, roof details, and system maintenance. |
| NRCA Roofing Manual: Membrane Roofing Systems | 2023 | Low-slope membranes, elastomeric systems, bituminous roofing, detailing, installation, and repairs. |
| Code of Federal Regulations, 29 CFR Part 1926 | Latest Available Amendments or Authorized PSI Selection | Construction safety, fall protection, ladders, scaffolds, PPE, tools, and worksite hazards. |
| ASTM D4756, Standard Practice for Installation of Rigid PVC Siding and Soffit | PSI-Listed Edition | PVC siding and soffit preparation, fastening, clearances, accessories, and installation. |
| Roofing Construction and Estimating, Daniel Atcheson | 1995 | Roof measurements, material quantities, estimating methods, and trade knowledge. |
| Carpentry and Building Construction | 2010 or 2016 Student Edition | Roof framing, sheathing, siding, exterior construction, materials, and carpentry details. |
| International Building Code | 2021 | Roof assemblies, exterior wall systems, structural conditions, weather protection, and building-code requirements. |
| NASCLA Contractor's Guide to Business, Law and Project Management, Mississippi | 6th Edition | Separate Mississippi Law and Business Management examination preparation. |
Trade test: Eight technical references.
Business and Law test: Mississippi NASCLA business guide.
Book preparation: Permanent tabs, highlighting, and underlining subject to PSI rules.
Prohibited items: Temporary tabs, removable notes, loose papers, and unauthorized inserts.
Important: Only bring references authorized for the specific examination scheduled that day.
The Mississippi Roofing, Sheet Metal and Siding Contractor examination is open book, but that does not mean every answer can be found quickly without preparation.
Candidates have only two hours to answer 60 questions.
With eight technical books covering different subjects, knowing which reference to use can save significant time.
Begin by organizing your study references.
Learn the subject covered by each manual.
Use permitted permanent tabs to locate useful chapters, tables, and sections.
Practice highlighting and underlining important material before examination day.
Do not attach removable notes or temporary tabs to reference books.
Practice reading each question, identifying the topic, selecting the correct book, and finding the relevant rule.
If a question takes too long, use an appropriate exam strategy and return to it when time allows.
The Mississippi Roofing, Sheet Metal and Siding specialty classification covers work involving exterior roof and cladding systems.
The roofing portion includes installation, maintenance, repairs, alteration, waterproofing, protective coatings, and work intended to stop roof leaks or extend the life of a roofing system.
Related roof-deck attachments and repair or replacement of roof sheathing or fascia may be included when necessary during roof repair or replacement.
The sheet metal portion covers specified fabrication, installation, alteration, and repair of exterior metal components.
These include flashing, gutters, leaders, downspouts, cornices, and metal pans.
The siding portion includes the fabrication and installation of aluminum, vinyl, and other exterior siding materials.
It also includes related fascia, soffit, and gutter work within the classification scope.
However, the specialty classification does not automatically authorize every construction trade.
Major structural work, electrical work, plumbing, or other specialty services may require different licenses.
Mississippi's separate Residential Roofer classification also has its own limitations.
Contractors should confirm permitted work with MSBOC before bidding on projects that fall outside their established classification.
Roofing: Installation, repairs, maintenance, and waterproofing.
Sheet metal: Flashing, gutters, leaders, downspouts, and related components.
Siding: Exterior siding, fascia, soffit, and related work.
Scope questions: MSBOC makes the final classification determination.
| Classification | Authority | Main Difference |
|---|---|---|
| Roofing, Sheet Metal and Siding | MSBOC | Tested specialty classification involving roofing, exterior metalwork, and siding. |
| Residential Roofer | MSBOC | Separate classification limited to residential roofing work. |
| Building Construction | MSBOC | Major classification covering general building construction and designated specialty work. |
| Carpentry and Framing | MSBOC | Separate tested specialty classification for framing and related carpentry activities. |
| Remodeling | MSBOC | Separate tested specialty classification for remodeling and repair work. |
| Sheetmetal | MSBOC | Separate classification with its own scope, which may include ductwork and other sheet metal fabrication. |
| Roofing Specialty Trade Exam | PSI | 60 questions, 120 minutes, 70% passing. |
| Mississippi Business and Law Exam | PSI | Separate examination covering contractor business and legal responsibilities. |
| Commercial Contractor License | MSBOC | Generally required for qualifying commercial projects over $50,000. |
| Residential Roofing Licensing | MSBOC | State licensing generally applies to residential roofing work over $10,000, with the correct classification determined by the Board. |
Application and Eligibility
60 Questions | Two Hours
Separate Contractor Licensing Exam
Use this six-week schedule to learn the eight PSI trade categories, organize approved references, and practice the two-hour open-book exam.
The Mississippi Roofing, Sheet Metal and Siding Contractor examination can be challenging because it covers several different exterior construction systems.
Contractors who work primarily with asphalt shingles may know steep roofing very well.
However, the exam also includes siding, low-slope roofing, built-up systems, safety, flashing, and substrate questions.
Someone who has worked only with vinyl siding may need additional study in roofing systems.
The PSI exam contains 60 questions and lasts two hours.
That leaves approximately two minutes per question.
The open-book format helps, but the reference collection is large.
Learning where information is located can make a major difference in test preparation.
For example, a question about PVC siding installation is most likely answered by the ASTM reference.
Fall protection questions point to OSHA regulations.
Steep roof assembly questions point to the appropriate NRCA manual.
Questions about building-code roof assembly requirements may require the International Building Code.
Roofing quantities and cost estimating may require the Roofing Construction and Estimating book.
Study materials such as the Mississippi Roofing Online Course can help applicants review these areas systematically.
The Ultimate Exam Prep Rental Package offers pre-highlighted and permanently tabbed references for candidates who prefer organized books.
No course guarantees examination success.
Regular study, timed practice, construction knowledge, and familiarity with approved references remain important.
Contractor Exam Preps offers trade-specific reference packages, an online preparation course, prepared rental books, and licensing-support packages for Mississippi Roofing, Sheet Metal and Siding applicants.
Choose the package that matches the books and services you need.
Eight Technical PSI Reference Books
View Mississippi Roofing, Sheet Metal and Siding Book Package
Digital Roofing Trade Preparation
Prepared Books, Course Access and Application Support
Technical books: Mississippi Roofing, Sheet Metal and Siding Book Package.
Digital course: Mississippi Roofing, Sheet Metal and Siding Online Exam Prep.
Prepared book rental: Ultimate Exam Prep Rental Package.
Business setup assistance: Available through the separate All-Inclusive Package.
Important: Confirm current availability, pricing, and package conditions on the product pages.
For an expanded package that combines the examination references, course access, application assistance, LLC or corporation formation help, and EIN filing support, explore the All-Inclusive Mississippi Roofing, Sheet Metal and Siding Contractor Package.
For business and legal study, consider the Mississippi NASCLA Contractor's Guide, 6th Edition and Mississippi PSI Business and Law Practice Questions.
Actual Mississippi Roofing, Sheet Metal and Siding Contractor product image hosted directly by ContractorExamPreps.com. The credential illustration is educational and is not an official state-issued license.
This Mississippi-themed educational credential represents the specialty classification, roofing knowledge, PSI testing, and contractor licensing responsibilities.
The related product artwork is a real Contractor Exam Preps store image for the Mississippi Roofing, Sheet Metal and Siding All-Inclusive Package.
• Mississippi State Board of Contractors
• Roofing, Sheet Metal and Siding Classification
• PSI Trade Examination
• 60 Exam Questions
• 120-Minute Time Limit
• 70% Passing Score
• 42 Correct Answers Required
• Open-Book Testing
• Eight Approved Technical References
• Steep-Slope Roofing
• Roof Shingles
• Underlayment Systems
• Roofing Substrates
• Roof Decking and Sheathing
• Roof Attachments
• Roof Repairs
• Leak Correction
• Roof Waterproofing
• Roof Coatings
• Elastomeric Roofing
• Built-Up Bituminous Roofing
• Membrane Roofing
• Metal Panel Roofing
• SPF Roofing
• Roof Flashing
• Sheet Metal Details
• Metal Gutters
• Leaders and Downspouts
• Siding Materials
• PVC Siding
• Vinyl Siding
• Exterior Wall Protection
• Soffit Installation
• Fascia Installation
• ASTM D4756
• Roofing Construction
• Roof Measurements
• Material Quantities
• Roofing Estimating
• OSHA 29 CFR Part 1926
• Fall Protection
• Ladder Safety
• Scaffold Safety
• Personal Protective Equipment
• 2021 International Building Code
• Construction Code Compliance
• Mississippi Business and Law
• Contractor Application
• Qualifying Party
• PSI Eligibility Approval
• Contractor License Renewal
• Open-Book Reference Navigation
• Highlighted and Tabbed Books
• Timed Practice Examinations
Explore Mississippi Roofing, Sheet Metal and Siding All-Inclusive Package
Mississippi Roofing Contractor Licensing
It is a tested specialty contractor classification regulated by the Mississippi State Board of Contractors.
The Mississippi State Board of Contractors, known as MSBOC, administers contractor licensing.
The classification covers specified roofing installation, maintenance, repairs, waterproofing, exterior sheet metal, flashing, gutters, siding, fascia, soffits, and related work.
MSBOC generally requires commercial contractor licensing for qualifying commercial jobs over $50,000. Other special project types may have different thresholds.
Mississippi generally requires state licensing for residential roofing work over $10,000. Confirm the appropriate Residential Roofer or other applicable classification with MSBOC.
No. Mississippi lists Residential Roofer separately from the Roofing, Sheet Metal and Siding specialty classification. Their scopes and examination requirements may differ.
Yes. The Board must review the application and establish examination eligibility before the candidate schedules through PSI.
The qualifying party is the individual designated to satisfy the testing requirements for the contractor's license. The individual must maintain the relationship required by MSBOC.
Mississippi PSI Roofing Trade Exam
The trade examination contains 60 scored questions.
Candidates are given two hours, or 120 minutes, to complete the trade examination.
A score of 70% is required, which means at least 42 correct answers out of 60.
Yes. It is an open-book PSI examination, subject to approved reference and test-center rules.
PSI administers the examination after MSBOC sends the candidate's eligibility.
With 60 questions in 120 minutes, average pacing is approximately two minutes per question.
The current published guidance generally gives new applicants six months to complete required examinations after eligibility approval.
Retesting is generally permitted during the eligibility period, subject to PSI scheduling and fee rules. Applicants who do not complete testing within the eligibility period may need to reapply to MSBOC.
Official Roofing Exam Topics
Steep roofing is the largest category, with 17 questions, or approximately 28.3% of the examination.
The PSI outline lists eight questions covering roofing substrates.
General siding knowledge accounts for eight questions.
The examination includes seven questions on elastomeric roofing.
Built-up bituminous roofing accounts for seven questions.
Yes. Six questions cover safety subjects such as fall protection, ladders, scaffolds, equipment safety, and PPE.
The PSI blueprint lists four questions on roofing repairs.
Sheet metal and flashing account for three scored questions.
Open-Book Reference Materials
The current published trade examination reference list includes eight technical books.
Study the 2025 Steep Slope Roof Systems manual, 2024 Metal Panel and SPF Roof Systems manual, and 2023 Membrane Roofing Systems manual, subject to the current PSI approved list.
The current published examination reference list identifies the 2021 International Building Code.
ASTM D4756 is the standard practice for installation of rigid PVC siding and soffit.
Permanent tabs are generally permitted under current PSI rules. Review the latest Candidate Information Bulletin for exact conditions.
No. Temporary tabs, removable notes, loose pages, and unauthorized inserted materials are not permitted.
Highlighting and underlining before the exam are generally permitted within PSI guidelines. Do not write in the books during testing.
Mississippi Business and Law Exam
MSBOC generally requires the Mississippi Law and Business Management examination for contractor applicants. Confirm any applicable exemption or waiver directly with the Board.
The published Mississippi Business and Law exam information lists 50 questions, a two-hour limit, and a 70% passing requirement.
The Mississippi NASCLA Contractor's Guide to Business, Law and Project Management, 6th Edition, supports preparation for the separate business and law examination.
Mississippi reciprocity arrangements may support a trade examination waiver but generally do not eliminate the required state contractor application or Mississippi Business and Law examination.
Contractor License Maintenance
Mississippi contractor licenses are generally valid for one year and must be renewed annually.
No. MSBOC must approve the completed licensing application and confirm all applicable requirements before issuing the license.
Contractors must follow MSBOC rules for using the business name appearing on their license. Contact the Board before changing how the company bids or signs contracts.
Contractor Exam Preps Products
Yes. The store offers a Mississippi Roofing, Sheet Metal and Siding Contractor Book Package containing eight technical references for the trade examination.
Yes. Contractor Exam Preps sells a Mississippi Roofing, Sheet Metal and Siding Online Exam Prep Course covering trade topics, practice questions, and reference navigation.
The Ultimate Package includes nine prepared rental references, one year of course access, trade and Business and Law preparation, and Application Service, subject to the store's terms.
Yes. The listed rental references are professionally highlighted and permanently tabbed.
Yes. It includes a refundable book deposit, subject to returning the rental books in the required condition within the stated rental period.
Yes. The All-Inclusive Package includes exam preparation, prepared references, Application Service, business formation assistance, EIN filing, and contractor compliance guidance.
No. Study products support preparation, but examination results and license approval depend on individual performance and MSBOC requirements.
Watch this directly related 1ExamPrep video about Mississippi Roofing Contractor examination preparation, licensing requirements, approved books, open-book testing, roofing safety, and study strategies.
The video discusses Mississippi roofing licensing and the contractor examination process. It complements this guide's coverage of Roofing, Sheet Metal and Siding trade subjects, PSI testing, and MSBOC requirements.
Video: How to Pass the Mississippi Roofing Contractor Exam.
Creator: 1ExamPrep.
Topics: Mississippi roofing contractor licensing, open-book PSI preparation, approved references, safety, and exam strategy.
Trade exam: 60 questions, 120 minutes, 70% passing.
Reminder: The current PSI Candidate Information Bulletin controls examination rules and book permissions.
Use MSBOC and PSI resources to verify licensing and testing rules. Explore Contractor Exam Preps for roofing references, online courses, book rental packages, and Business and Law study materials.
State: Mississippi.
Classification: Roofing, Sheet Metal and Siding.
Authority: MSBOC.
Exam provider: PSI.
Trade exam: 60 questions, 120 minutes, 70% passing.
Largest section: Steep roofing, 17 questions.
Approved trade books: Eight references.
Additional examination: Mississippi Law and Business Management.
License renewal: Annual.
Preparing for the Mississippi Roofing, Sheet Metal and Siding Contractor examination is an important step for professionals who want to become licensed in this specialized construction field.
The license is regulated by the Mississippi State Board of Contractors.
It covers roofing installation, maintenance, repairs, waterproofing, exterior sheet metal, siding, fascia, soffits, and related weather-protection components.
These systems help protect buildings from rain, wind, moisture, and normal wear.
A contractor working in this field must understand how different exterior components connect and how poor installation details can cause damage.
For example, even a high-quality roof covering may fail when flashing or drainage is installed incorrectly.
That is why technical knowledge matters when preparing for the Mississippi licensing examination.
The state requires applicants to complete the contractor licensing process through MSBOC.
Applicants must select the correct classification, submit the required application documents, designate a qualifying party, and receive approval before scheduling PSI examinations.
The current Roofing, Sheet Metal and Siding trade examination contains 60 scored questions.
Applicants receive two hours to complete the test.
The minimum passing score is 70%.
This means at least 42 questions must be answered correctly.
The examination is open book, but only approved reference materials are permitted.
Candidates should confirm the current PSI Candidate Information Bulletin before test day.
The published trade examination covers eight subject areas.
Steep roofing is the largest category, with 17 questions.
Roofing substrates and general siding knowledge follow with eight questions each.
Elastomeric roofing and built-up bituminous roofing each account for seven questions.
Safety accounts for six questions.
Roofing repairs include four questions.
Sheet metal and flashing account for three questions.
These exact category counts make it possible to build a focused study schedule.
Candidates should begin with steep roofing because it represents the largest portion of the examination.
That subject includes shingles, underlayments, flashing, valleys, roof penetrations, ventilation, and installation practices.
Roofing substrates are also important because decks, sheathing, and attachment methods influence the performance of the roofing system.
Siding involves materials, fasteners, soffits, fascia, installation allowances, and moisture management.
Low-slope roofing introduces additional materials and installation methods.
Elastomeric and membrane roofing systems must be studied separately from built-up bituminous roofing.
Sheet metal and flashing help direct water away from roof transitions, penetrations, and building edges.
Safety also deserves consistent attention because roofing work involves elevated surfaces, ladders, scaffolds, tools, and serious fall hazards.
Contractor Exam Preps offers the Mississippi Roofing, Sheet Metal and Siding Contractor Book Package.
This package contains eight technical references aligned with the trade examination.
It includes NRCA roofing manuals, OSHA construction safety material, an ASTM siding standard, estimating references, carpentry information, and the 2021 International Building Code.
The references are useful because the examination requires knowledge of several different roofing and exterior construction systems.
Students who prefer online learning can explore the Mississippi Roofing, Sheet Metal and Siding Online Exam Prep Course.
The course supports trade review, practice questions, and open-book reference navigation.
For candidates interested in prepared books and application support, the Mississippi Roofing Ultimate Rental Package combines nine rental references, course access, and licensing application assistance.
The rental books are professionally highlighted and permanently tabbed.
The package includes a refundable book deposit subject to its published rental return conditions.
Contractor Exam Preps also offers an All-Inclusive Package with additional business setup services.
Applicants should compare the products based on their individual preparation needs.
Another important part of the Mississippi licensing process is the separate Business and Law examination.
This examination covers contractor responsibilities such as business organization, contracts, project management, financial practices, employment requirements, and licensing compliance.
The Mississippi NASCLA Business, Law and Project Management guide helps candidates prepare for those subjects.
Passing the trade examination does not automatically issue a contractor license.
MSBOC must still approve the complete application and confirm the applicable requirements.
Contractors should also understand Mississippi's project thresholds.
Commercial contractor licensing generally applies to qualifying commercial work over $50,000.
Residential roofing work over $10,000 also triggers state licensing requirements.
However, Residential Roofer is a separate classification from Roofing, Sheet Metal and Siding.
Applicants should verify that they are applying for the classification matching their intended projects.
A six-week study plan can make preparation easier to manage.
Begin by organizing the current approved references and reviewing the PSI blueprint.
Spend the second week studying steep roofing.
Then review substrates and siding.
Continue with low-slope systems, membrane roofing, elastomeric roofing, and built-up bituminous roofing.
During the final weeks, study OSHA safety, flashing, roofing repairs, and Mississippi Business and Law.
Complete timed mock exams containing 60 questions within 120 minutes.
Learn to identify the correct reference before searching for an answer.
That habit is especially helpful in an open-book examination involving eight technical manuals.
Remember that allowed reference materials must follow PSI's current rules for tabs, markings, and inserted materials.
After licensing, the company must continue meeting MSBOC requirements and renew the license annually.
A contractor who develops strong technical knowledge, safe work habits, organized reference skills, and business awareness will be better prepared for both the examination and the responsibilities that come with licensure.
With official MSBOC information, the current PSI examination outline, practical study sessions, and relevant Contractor Exam Preps products, applicants can prepare more confidently for the Mississippi Roofing, Sheet Metal and Siding Contractor examination.
Find Mississippi Roofing, Sheet Metal and Siding Contractor study books, PSI exam preparation courses, prepared reference packages, and business-law study materials at ContractorExamPreps.com.
