Couldn't load pickup availability
CALL TO ASK ABOUT FINANCIAL ASSISTANCE
Prepare for the North Carolina Special Restricted Elevator Contractor examination with a highlighted and tabbed book package covering elevator electrical systems, motors, controllers, disconnecting means, conductors, grounding, bonding, raceways, overcurrent protection, contractor licensing law, Board rules, business practices, and project management.
The Special Restricted Elevator classification, commonly identified as SP-EL, applies to electrical wiring performed as an incident to an elevator-related business. The classification covers qualifying electrical work that is an integral part of elevators, dumbwaiters, escalators, moving walks, and personnel hoists. It does not provide authority for general electrical contracting outside the restricted elevator scope.
This package includes the 2020 National Electrical Code as the approved examination-room reference. The NEC supports preparation involving elevator equipment, motors, controllers, feeders, branch circuits, disconnects, conductor ampacity, grounding, bonding, boxes, raceways, overcurrent protection, control circuits, and general electrical installation requirements.
The package also includes three closed-book study references: Electrical Contractors Licensing Law, the Board’s Rules for the Implementation of the Electrical Contractors Licensing Law, and the NASCLA Contractors’ Guide to Business, Law, and Project Management: North Carolina Electrical Edition. These references are not allowed in the examination room but support preparation involving licensing, experience qualifications, restricted license scope, contracts, estimating, financial management, safety, employment practices, and project administration.
All included trade books are highlighted and tabbed to support organized preparation. Permanent tabs help candidates find major NEC articles, motor tables, grounding provisions, licensing topics, Board rules, and business subjects. Highlighting draws attention to important definitions, calculations, limitations, exceptions, procedures, and contractor responsibilities.
A highlighted and tabbed book package can reduce the time spent searching through unfamiliar material during study. Candidates should still read complete provisions, follow cross-references, and understand how exceptions affect a requirement. Highlighted passages and tabs are navigation tools, not replacements for technical knowledge or repeated practice.
The North Carolina Special Restricted Elevator Contractor examination is open book, but only the approved 2020 National Electrical Code may be used in the examination room. The licensing law, Board rules, and NASCLA business reference are included for closed-book preparation and should be studied before test day.
Please allow an additional 15 business days for highlighted and tabbed trade book package orders. This additional processing period allows the references to be organized and prepared before shipment.
The North Carolina Special Restricted Elevator Contractor examination contains 40 multiple-choice questions. Candidates have up to three hours to complete the examination, and a minimum score of 70 is required to pass.
The examination is administered after the North Carolina State Board of Examiners of Electrical Contractors approves the applicant. Approved candidates receive examination eligibility and scheduling instructions for the authorized testing service.
The SP-EL examination evaluates the electrical knowledge needed to install, maintain, or repair wiring that is integral to elevator-related equipment. Preparation should include elevators, dumbwaiters, escalators, moving walks, personnel hoists, motors, controllers, disconnects, feeders, branch circuits, conductors, raceways, boxes, grounding, bonding, and overcurrent protection.
Motor preparation should include full-load current, conductor sizing, feeder sizing, overload protection, short-circuit and ground-fault protection, controllers, disconnecting means, and the proper use of NEC motor tables. Candidates should understand that different motor calculations may use different Code rules and values.
Elevator electrical systems may include driving machines, controllers, motor-generator sets, disconnects, car lighting, machine-room equipment, control wiring, signaling equipment, receptacles, ventilation equipment, and related electrical components. Candidates should review both elevator-specific NEC requirements and the general articles that apply to these systems.
Feeder and branch-circuit preparation may involve calculating connected loads, selecting conductor ampacity, applying continuous-load rules, sizing overcurrent devices, and determining requirements when a circuit supplies more than one motor or piece of equipment.
Conductor preparation should include insulation types, temperature ratings, terminal limitations, conductor materials, correction factors, adjustment factors, raceway conditions, and the use of NEC ampacity tables.
Overcurrent-protection questions may address standard fuse and circuit-breaker sizes, motor protection, feeder protection, conductor protection, equipment protection, and NEC exceptions that apply to motor circuits.
Box-fill preparation may include conductor volume, equipment grounding conductors, devices, internal clamps, fittings, conductor sizes, and minimum box capacity. Candidates should practice identifying which items count toward box fill and how each allowance is calculated.
Raceway questions may involve permitted uses, prohibited uses, support, bends, physical protection, wet locations, fittings, bonding, fill, and conductor installation. Candidates should be familiar with metallic and nonmetallic raceway provisions that may apply to elevator-related wiring.
Grounding and bonding preparation should include equipment grounding conductors, bonding jumpers, metal enclosures, disconnects, controllers, raceways, and the creation of an effective ground-fault current path.
The examination may also include permit and inspection requirements, business practices, and North Carolina statutes and rules applicable to electrical contracting. Candidates should understand the restricted SP-EL scope and the responsibilities of the listed qualified individual.
The North Carolina Special Restricted Elevator Contractor examination is an open-book test. The 2020 National Electrical Code is the only reference from this package allowed in the examination room.
The highlighted and tabbed NEC is prepared to support organized navigation to major articles, tables, definitions, and commonly reviewed subjects. Candidates should use this same book during preparation so the placement of tabs and highlighted sections becomes familiar before test day.
The Electrical Contractors Licensing Law, Board rules, and NASCLA business reference are included for study but are not permitted in the examination room. Candidates should review those materials thoroughly because licensing and business questions must be answered without consulting the books during the test.
The NEC must be brought in a format accepted under the current testing rules. Candidates should not add loose paper, removable notes, temporary tabs, unauthorized inserts, or other prohibited material.
Permanent tabs and permitted highlighting should be used as navigation aids. Every book taken to the examination center must comply with the current rules governing binding, markings, notes, tabs, and added materials.
Open-book testing still requires preparation. The NEC contains many articles, tables, exceptions, definitions, and cross-references. Candidates should know how to identify the subject of a question and move directly to the most relevant article or table.
A question about elevator wiring should direct the candidate to the NEC provisions for elevators and related equipment. A motor-current question may require an NEC motor table rather than a value shown on an equipment nameplate.
A feeder supplying several motors may require the feeder rules in addition to the individual motor requirements. A grounding question may require both the general grounding article and a provision specific to elevator equipment.
Timed navigation practice should include using the index, reviewing definitions, locating tables, following cross-references, and reading exceptions. Candidates should review the complete section before selecting an answer because nearby language may limit or modify the general rule.
The North Carolina State Board of Examiners of Electrical Contractors regulates electrical contractor examinations and licensing. The Board establishes license classifications, reviews experience, authorizes candidates, issues licenses, and enforces the Electrical Contractors Licensing Law and related rules.
An applicant for the Special Restricted Elevator classification must document at least 3,000 hours of qualifying experience. At least 2,000 hours must be primary experience. The remaining hours may consist of primary experience, secondary experience, or a combination of both.
Qualifying experience may include approved work in the elevator field when it falls within the experience categories recognized by the Board. The applicant must document that experience according to the examination application requirements.
The applicant must also verify that the applicant is primarily engaged in or regularly employed by a lawful elevator business in North Carolina and will serve as the listed qualified individual for that business.
The SP-EL license authorizes installation, maintenance, or repair of electrical wiring only as an incident to an elevator, dumbwaiter, escalator, moving walk, or personnel-hoist business.
The electrical wiring must be an integral part of the elevator-related equipment. The authorized restricted work begins beyond the applicable disconnecting means after the line-side connections have been completed by others.
Building wiring on the line side of the disconnecting means is outside the restricted elevator classification. The SP-EL license does not authorize general electrical contracting or unrelated electrical installations.
Special restricted classifications are not subject to the same project-value limitations that apply to Limited and Intermediate regular electrical contractor licenses. However, all work must remain within the authorized SP-EL scope.
Electrical contracting must be conducted in the name shown on the active license. The licensed entity and listed qualified individual must comply with requirements involving supervision, business operation, advertising, renewal, and changes in employment or business status.
Passing the examination does not independently authorize electrical contracting. The appropriate license must be issued and active before the individual or business performs or offers to perform work requiring the SP-EL classification.
Listed qualified individuals in special restricted classifications are subject to current continuing education requirements for license renewal. License holders should maintain accurate records and complete required education within the applicable renewal period.
Build a study schedule around elevator systems, motors, motor feeders, branch circuits, disconnects, controllers, conductor ampacity, overcurrent protection, raceways, box fill, grounding, bonding, licensing law, Board rules, and contractor business practices.
Spend regular study time using the highlighted and tabbed 2020 NEC. Learn the location of the elevator article and review the general articles governing motors, feeders, conductors, boxes, raceways, grounding, bonding, disconnects, and overcurrent protection.
Practice motor calculations using the appropriate NEC tables. Review motor conductor sizing, feeder sizing, overload protection, and short-circuit protection as separate procedures.
Use timed reference exercises. Read the question, identify the electrical subject, select the proper article or table, review the complete provision, and determine whether an exception, definition, or cross-reference applies.
Study the licensing law and Board rules separately because they are not available during the examination. Focus on SP-EL experience requirements, restricted scope, listed qualified individual responsibilities, application procedures, renewals, continuing education, and prohibited conduct.
Review the NASCLA business reference for contracts, estimates, scheduling, financial controls, employment responsibilities, insurance, safety administration, project documentation, and risk management.
Contractor Exam Prep helps North Carolina Special Restricted Elevator Contractor candidates organize technical, licensing, and business references into a practical study structure.
Highlighted and tabbed books support faster access to major NEC articles, motor tables, Board rules, licensing provisions, and business topics. This organization helps candidates spend more time understanding the material and less time searching through unfamiliar pages.
Trade-focused review connects NEC requirements with elevator electrical work, including motors, controllers, feeders, disconnects, conductor sizing, raceways, grounding, bonding, and overcurrent protection.
Practice-oriented preparation helps candidates identify the electrical subject, locate the proper NEC article or table, review the governing requirement, and apply the information to an examination question.
Reference-navigation practice builds familiarity with the 2020 NEC index, definitions, articles, tables, exceptions, and cross-references. These skills support effective use of the approved reference during the three-hour open-book examination.
Closed-book study guidance helps candidates review the Electrical Contractors Licensing Law, Board rules, restricted SP-EL scope, experience requirements, and business-management subjects that cannot be referenced during the test.
No book package can guarantee examination passage or license issuance. Results depend on the candidate’s experience, qualifications, preparation, understanding of elevator electrical systems, knowledge of the restricted license scope, and performance during the examination.
The package includes the 2020 National Electrical Code, Electrical Contractors Licensing Law, the Board’s electrical contracting rules, and the NASCLA Contractors’ Guide to Business, Law, and Project Management: North Carolina Electrical Edition.
Yes. The included trade references are highlighted and tabbed to support organized preparation and faster navigation.
Please allow an additional 15 business days for highlighted and tabbed trade book package orders.
Yes. The examination is open book, but only the approved 2020 National Electrical Code may be used in the examination room.
No. Those references are included for closed-book study and are not allowed in the testing room.
The Special Restricted Elevator Contractor examination contains 40 multiple-choice questions.
Candidates have up to three hours to complete the examination.
A minimum score of 70 is required to pass.
Applicants must document at least 3,000 hours of qualifying experience, including at least 2,000 hours of primary experience.
The license authorizes electrical wiring that is an integral part of an elevator, dumbwaiter, escalator, moving walk, or personnel hoist as an incident to the license holder’s elevator business.
No. The license is limited to elevator-related electrical work within the scope established by the Board’s rules.
Only markings and permanent tabs permitted under current examination rules should be added. Temporary tabs, loose pages, removable notes, and unauthorized materials are not allowed.
No. Passing satisfies the examination requirement, but the applicant must complete the Board’s licensing process before performing work under the SP-EL classification.
