Couldn't load pickup availability
CALL TO ASK ABOUT FINANCIAL ASSISTANCE
Prepare for the North Carolina Metal Erection Contractor exam with a comprehensive rental package that combines highlighted and tabbed trade references with 6 months of course access. This package supports organized study across structural steel erection, high-strength bolted connections, steel joists and girders, steel decking, reinforcing bars, welding, metal roofing and cladding, fencing, construction safety, contractor regulations, and business management.
Metal erection is a specialized construction field that requires technical knowledge, careful planning, safe handling procedures, and an understanding of how structural components are connected and stabilized. Contractors may work with structural shapes, plates, steel joists, girders, decking, reinforcing steel, fabricated assemblies, fencing, roofing panels, cladding, stairs, rails, and other metal components. Exam preparation should reflect the variety of materials, connections, procedures, and jobsite hazards involved in this work.
This rental package includes the North Carolina Occupational Safety and Health Standards for the Construction Industry, with the latest available amendments, and the Specification for Structural Joints Using ASTM A325 or A490 Bolts, 2004. These references are identified for exam-room use and support preparation involving construction safety, steel erection, structural stability, fall protection, rigging, high-strength bolts, joint types, pretensioning, inspection, and connected materials.
The package also includes several references that are not allowed in the exam room but remain important for preparation. These books address metal roofing and cladding, reinforcing-bar placement, steel joists and joist girders, steel-deck construction, welding, fencing, contractor laws, business practices, and project management. Studying these subjects before exam day helps candidates build the knowledge needed to answer questions without consulting the restricted books during the test.
All included books are tabbed and highlighted to support faster study and more organized reference navigation. Tabs help identify major subjects, while highlighting draws attention to important material within the references. Candidates should still read complete sections, understand the surrounding context, and practice locating information under timed conditions.
The package includes 6 months of course access. The trade course provides an organized study structure that complements the rental books and helps candidates review major examination subjects, practice reference navigation, strengthen trade knowledge, and build a consistent preparation schedule.
Please allow 15 business days for processing. The package price is $1,390, plus a $400 refundable rental-book deposit, for a total initial payment of $1,790. The $400 deposit is refunded when the books are returned in similar condition within 6 months from the time they are received.
The North Carolina Metal Erection Contractor exam evaluates knowledge associated with the fabrication, handling, assembly, erection, connection, alteration, and repair of metal construction components. Preparation should cover both structural work and the safety procedures required when working with heavy materials, elevated work areas, cranes, rigging equipment, welding processes, bolted connections, and temporary structural conditions.
Steel joists and joist girders are an important part of metal erection preparation. Candidates should study proper storage, handling, lifting, placement, bearing, alignment, bridging, temporary stability, field connections, and erection sequencing. A joist or girder may remain unstable until required bridging and connections are installed, making safe sequencing an essential part of the work.
Steel-deck preparation should include deck identification, storage, lifting, placement, alignment, attachment, side laps, openings, temporary loading, and coordination with supporting structural steel. Candidates should understand how roof deck and floor deck are handled and why proper attachment and safe placement procedures are necessary during construction.
High-strength structural bolting requires knowledge of joint types, bolt assemblies, connected materials, faying surfaces, washers, installation procedures, pretensioning, inspection, and the differences among connection requirements. Candidates should become familiar with the terminology and organization of the structural-joints specification so they can locate relevant information efficiently.
Welding preparation may include welding processes, equipment, electrodes, joint designs, positions, symbols, cutting methods, base metals, inspection concepts, and safe work practices. Candidates should understand how welding is used to connect structural and miscellaneous metal components and how preparation, procedure, equipment, and workmanship affect the completed connection.
Additional exam preparation may include reinforcing-bar placement, profiled metal roofing and cladding, fencing, retaining-wall concepts, North Carolina contractor regulations, liens, business practices, contracts, project administration, estimating, safety, and risk management. These subjects reflect the varied responsibilities of a metal erection contractor.
The North Carolina Metal Erection Contractor exam is open book for the references identified as permitted in the exam room. This package includes two exam-room references: the North Carolina Occupational Safety and Health Standards for the Construction Industry, with the latest available amendments, and the Specification for Structural Joints Using ASTM A325 or A490 Bolts, 2004.
The remaining books in this package are included as study references and are not allowed in the exam room. Candidates should use them during preparation to learn the technical, legal, and business subjects associated with metal erection work. Because these books will not be available during the test, their major concepts should be reviewed repeatedly before exam day.
Open-book testing requires more than owning a reference. Candidates should know which book applies to a question, where the relevant material is located, and how the publication is organized. Practice should include reviewing tables of contents, indexes, definitions, headings, tables, notes, and cross-references.
The highlighted and tabbed format helps organize the books, but the candidate must still understand the question and select the correct subject. A question involving steel-erection fall protection should direct the candidate to the safety standards, while a question involving pretensioned structural bolts should direct the candidate to the structural-joints specification.
Read complete provisions before choosing an answer. Technical requirements may contain limitations, exceptions, definitions, inspection criteria, or related procedures that affect the correct response. Avoid relying on one highlighted sentence without reviewing the surrounding section.
Candidates should prepare all exam-room materials according to the applicable testing rules. Tabs, highlighting, binding, markings, inserts, and book condition must comply with the requirements in effect for the examination.
North Carolina contractor licensing distinguishes between the examination credential held by a qualifier and the contractor license issued to an approved individual or business entity. Passing the Metal Erection examination does not by itself authorize a person or company to bid, contract, or perform work that requires an active contractor license.
The applicant must select the appropriate classification and license limitation, provide the required application information, identify an eligible qualifier, and satisfy the applicable financial and administrative requirements. The legal entity entering into construction contracts should match the entity shown on the approved contractor license.
A Metal Erection Contractor should operate within the work authorized by the classification and within the project limitation shown on the active license. Contractors are also responsible for complying with applicable permits, inspections, safety standards, contract requirements, employment obligations, and other laws governing construction activity.
Changes involving the licensed entity, business name, ownership, qualifier, or other material information should be addressed through the applicable licensing process. Maintaining accurate records and an active license is an ongoing contractor responsibility.
Contractors should also understand the difference between licensing requirements and project-specific code or safety requirements. Holding a contractor license does not replace the obligation to comply with approved plans, specifications, jobsite safety standards, inspection requirements, and contractual responsibilities.
Begin preparation by dividing the material into major subjects: steel-erection safety, general construction safety, steel joists and girders, steel decks, reinforcing bars, welding, structural bolting, metal roofing and cladding, fencing, contractor regulations, liens, and business management.
Use the two exam-room references during timed open-book practice. This helps candidates become familiar with the books they will rely on during the test and reduces dependence on materials that are not permitted in the exam room.
Study the restricted books separately and review their important concepts repeatedly. Create a schedule that rotates among technical reading, course lessons, practice questions, and exam-room reference navigation.
Use the tabs to locate major subjects, then read the highlighted material in context. Practice looking up unfamiliar terms through the index and identifying related sections that may affect the answer.
The included trade course provides 6 months of course access. Use that period to build consistent study habits, review each subject area, complete reference searches, and strengthen understanding of structural connections and safe erection practices.
Contractor Exam Prep helps North Carolina Metal Erection Contractor candidates combine highlighted and tabbed rental books with an organized online trade course.
Trade-focused review connects steel members, joists, girders, decking, reinforcing bars, welded connections, bolted joints, roofing systems, fencing, and safety procedures as parts of complete metal construction projects.
Practice-oriented preparation helps candidates identify the subject of a question, select the correct reference, locate the relevant provision, and apply the information to a practical situation.
Reference-navigation practice focuses on the safety standards and structural-joints specification allowed in the exam room. The highlighted and tabbed format supports faster access to major sections during study and practice.
The course also organizes closed-book preparation around the roofing, reinforcing-bar, joist, steel-deck, welding, fencing, legal, and business references that candidates must study before exam day.
No package can guarantee examination passage or license approval. Results depend on the candidate’s preparation, trade knowledge, reference familiarity, participation, and performance during the examination.
The package includes ten highlighted and tabbed rental references, 6 months of trade-course access, and preparation materials covering technical, safety, licensing, and business subjects.
The package price is $1,390, plus a $400 refundable rental-book deposit, for a total initial payment of $1,790.
The deposit is refunded when the books are returned in similar condition within 6 months from the time they are received.
The package includes 6 months of course access.
Please allow 15 business days for processing.
Yes. All included rental references are highlighted and tabbed to support organized preparation and reference navigation.
The North Carolina Occupational Safety and Health Standards for the Construction Industry and the Specification for Structural Joints Using ASTM A325 or A490 Bolts, 2004, are included as exam-room references.
No. The roofing, reinforcing-bar, joist, steel-deck, welding, fencing, contractor-law, and business references are included for study but are not allowed in the exam room.
Yes. The included Fences & Retaining Walls reference is a used copy.
No. Highlighting and tabs support navigation, but candidates must understand the subjects, read complete provisions, and practice using the references before exam day.
No. Passing the exam satisfies the testing component, but the complete licensing application and all additional requirements must be approved before a license is issued.
No. Exam performance depends on the candidate’s preparation, trade experience, understanding of the material, reference-navigation skills, and performance during the test.
