Couldn't load pickup availability
CALL TO ASK ABOUT FINANCIAL ASSISTANCE
Prepare for the North Carolina Water Lines and Sewer Lines Contractor examination with a complete rental package that combines highlighted and tabbed trade references with an online exam prep course. This package supports organized preparation for contractors working with underground water distribution, sewer collection, ductile iron pipe, concrete pipe, excavation, grading, trench safety, erosion control, utility location, contractor law, and project management.
The North Carolina Water Lines and Sewer Lines classification covers construction involving water and sewer mains, water service lines, and house and building sewer lines. The classification also covers water storage tanks, lift stations, pumping stations, related appurtenances, pavement patching, backfill, and erosion control performed as part of water-line and sewer-line construction.
The package includes highlighted and tabbed rental references for occupational safety, ductile iron pipe installation, concrete pipe and box culvert installation, excavation safety, sedimentation control, business law, pipe contracting, and North Carolina general contracting laws and regulations.
The technical preparation focuses on the practical knowledge needed to complete underground utility work safely and correctly. Candidates should be prepared to review trenching, excavation protection, pipe handling, bedding, alignment, joining, testing, backfill, compaction, utility-location procedures, erosion control, and restoration of disturbed areas.
The included online course organizes examination topics into manageable study areas. Candidates can use the course alongside the highlighted and tabbed books to strengthen trade knowledge, practice reference navigation, review contractor responsibilities, and prepare for questions involving both field operations and North Carolina regulations.
This package includes a six-month book rental period and 6 months of course access. The book rental period begins when the books are received. The extended study period allows candidates to work through the technical material, review difficult topics, practice locating information, and build a consistent preparation schedule.
Please allow 15 business days for the rental books to be highlighted and tabbed before shipment. Permanent tabs and organized highlighting make it easier to locate major safety provisions, installation procedures, regulatory topics, calculations, tables, and project-management subjects during study.
The package price is $890, plus a $300 refundable book deposit, for a total of $1,190. The $300 deposit is refundable when the rental books are returned in similar condition within six months from the date they are received.
The package includes the 2019 edition of Concrete Pipe and Box Culvert Installation selected for this rental product. The current examination reference list identifies the 2007 edition for exam-room use. The included 2019 edition supports study and course preparation but should not be treated as the listed exam-room edition.
Highlighted and tabbed references can improve organization, but effective preparation still requires careful reading and application. Candidates should understand complete procedures, safety requirements, installation tolerances, regulatory responsibilities, and the sequence of work involved in water-line and sewer-line construction.
The North Carolina Water Lines and Sewer Lines Contractor examination contains 45 questions. Candidates have 120 minutes to complete the examination, and a score of 70 percent is required to pass.
The examination content includes safety, general trade knowledge, underground utility work involving concrete pipe, underground utility work involving ductile iron pipe, excavation and grading, liens, erosion and sedimentation control, one-call requirements, and laws and regulations.
Safety preparation should include personal protective equipment, hazard communication, trench access, protective systems, competent-person responsibilities, equipment operation, material handling, traffic exposure, confined spaces, and safe work around underground utilities.
Excavation preparation may involve soil conditions, trench stability, sloping, benching, shoring, shielding, spoil placement, ladders, ramps, water accumulation, atmospheric hazards, nearby structures, mobile equipment, and inspections of excavation work areas.
Ductile iron pipe preparation should include receiving and storing pipe, trench preparation, bedding, lowering pipe into the trench, alignment, joint assembly, gasket installation, cutting, fittings, restrained joints, thrust restraint, backfill, pressure testing, disinfection, and inspection.
Concrete pipe preparation may involve unloading, handling, storage, trench dimensions, foundation preparation, bedding, line and grade, joint installation, lift holes, haunch support, backfill placement, compaction, testing, and protection from construction loads.
General knowledge questions may address construction terminology, tools, equipment, materials, work sequencing, plan interpretation, measurements, quantities, field coordination, and accepted underground utility practices.
Excavating and grading topics may include site preparation, trench dimensions, dewatering, soil removal, equipment selection, grade control, bedding elevations, backfill lifts, compaction, settlement prevention, pavement restoration, and protection of existing improvements.
Erosion and sedimentation control preparation may include land-disturbing activities, stabilization, sediment barriers, construction entrances, diversion measures, stockpile protection, maintenance responsibilities, inspections, and protection of nearby property and waterways.
One-call preparation should address advance notice, facility-location requests, tolerance zones, markings, excavation practices, damage prevention, emergency procedures, and responsibilities when underground utilities are exposed or damaged.
Law and regulation topics may involve contractor licensing, qualifier responsibilities, liens, contracts, project records, business practices, statutory duties, license use, and compliance with North Carolina general contracting requirements.
The North Carolina Water Lines and Sewer Lines Contractor examination is an open-book test. Candidates may bring the references specifically allowed under the current examination rules.
The North Carolina Occupational Safety and Health Standards for the Construction Industry, with the latest available amendments, is included as an exam-room reference. It supports questions involving construction safety, trenching, excavation, protective systems, equipment, personal protective equipment, access, material handling, and workplace hazards.
The Installation Guide for Ductile Iron Pipe is included as an exam-room technical reference. It supports questions involving handling, trench preparation, bedding, joint assembly, fittings, thrust restraint, backfill, testing, and installation practices for ductile iron piping systems.
The examination reference list identifies the 2007 edition of Concrete Pipe and Box Culvert Installation for exam-room use. This package includes the customer-selected 2019 edition for study and course preparation. Candidates need the listed 2007 edition when preparing an exam-room reference set.
The North Carolina Excavation Safety Guidelines, sedimentation-control regulations, Sedimentation Pollution Control Act, NASCLA business guide, Pipe and Excavation Contracting, and North Carolina general contracting laws and regulations are included for closed-book study. These references are not allowed in the examination center.
Permitted references may be highlighted, underlined, and indexed before the examination. Permanent tabs may be used, but removable tabs and temporary flags are not permitted. Notes may not be written on the tabs.
Candidates may not write in the references before or during the examination. Loose papers, attached notes, unauthorized inserts, and partial references are not accepted as exam-room materials.
Open-book testing requires familiarity with the permitted references. Candidates should practice identifying the subject of a question, selecting the correct book, locating the relevant chapter or section, and applying the information without spending unnecessary time searching.
Timed practice should combine technical knowledge with efficient navigation. A useful process is to identify the installation or safety topic, determine which reference applies, locate the governing procedure, read the surrounding material, and select the answer that best reflects the complete requirement.
The North Carolina Licensing Board for General Contractors regulates the Water Lines and Sewer Lines classification. The classification falls within the public utilities category of general contracting.
The scope covers water and sewer mains, water service lines, house and building sewer lines, water storage tanks, lift stations, pumping stations, and appurtenances associated with those facilities. It also includes pavement patching, backfill, and erosion control performed as part of the construction.
A North Carolina general contractor license is required when a project meets the state’s licensing threshold. The license must include the classification and limitation needed for the work being contracted.
Each license must have a qualifying party for the classification. The qualifying party is the individual who completes the required examination and qualifies the business for the approved work classification.
The business must apply in the proper legal name and provide the ownership, organizational, financial, and qualifier information required by the Board. License limitations are tied to financial qualifications and control the size of projects the business may undertake.
Passing the trade examination does not independently authorize contracting. The license must be issued and active before the business undertakes work that requires North Carolina general contractor licensure.
Licensed contractors are responsible for performing work in accordance with applicable contracts, plans, specifications, safety requirements, environmental rules, utility-location requirements, permits, inspections, and professional standards.
Contractors should maintain accurate records involving contracts, changes, notices, project costs, subcontractors, safety activities, inspections, testing, and completion documentation.
Build a study schedule around safety, ductile iron pipe, concrete pipe, excavation, grading, erosion control, one-call procedures, liens, and contractor regulations. Spend additional time on concrete pipe, ductile iron pipe, and excavation because these areas represent a large portion of the examination.
Practice locating trenching provisions, protective-system requirements, access rules, spoil-placement requirements, water-accumulation controls, and competent-person duties in the safety reference.
Review ductile iron pipe installation from delivery through final testing. Understand bedding, joint cleanliness, gasket placement, deflection, fittings, thrust restraint, backfill, pressure testing, leakage testing, and disinfection.
Study concrete pipe installation as a complete system. Pipe performance depends on the foundation, bedding, haunch support, joint installation, initial backfill, final backfill, compaction, and protection from excessive construction loading.
Review the closed-book references repeatedly so that important excavation, sedimentation-control, lien, licensing, and business responsibilities can be answered without consulting those books during the test.
Contractor Exam Prep helps North Carolina Water Lines and Sewer Lines Contractor candidates organize technical, safety, regulatory, and business subjects into a practical study structure.
The highlighted and tabbed rental books support faster navigation through safety provisions, pipe-installation procedures, excavation topics, sedimentation-control rules, contractor laws, and project-management subjects.
The online course provides trade-focused review involving ductile iron pipe, concrete pipe, trenching, grading, utility location, erosion control, contractor law, and field operations.
Practice-oriented preparation helps candidates identify the subject of a question, select the appropriate reference, locate the relevant information, and apply the requirement to a construction situation.
Closed-book review strengthens familiarity with excavation guidelines, sedimentation-control requirements, business practices, liens, and North Carolina contractor regulations that cannot be referenced during the examination.
The six-month access period allows candidates to revisit challenging subjects, repeat technical review, practice navigation, and prepare according to their work schedule.
No course or rental-book package can guarantee examination passage or license issuance. Results depend on the candidate’s knowledge, experience, preparation, application approval, reference-navigation ability, and performance during the examination.
The package includes nine highlighted and tabbed rental references, the North Carolina Water Lines and Sewer Lines Contractor online exam prep course, a six-month rental period, and 6 months of course access.
The package price is $890, plus a $300 refundable book deposit, for a total of $1,190.
Yes. The deposit is refundable when the books are returned in similar condition within six months from the date they are received.
The rental period is six months from the date the books are received.
The package includes 6 months of course access.
Please allow 15 business days for the books to be highlighted and tabbed before shipment.
Yes. Candidates may use the references specifically permitted by the current examination rules.
No. The package includes the 2019 edition for study, while the current examination reference list identifies the 2007 edition for exam-room use.
The examination contains 45 questions.
Candidates have 120 minutes to complete the examination.
A score of 70 percent is required to pass.
The examination covers safety, general knowledge, concrete pipe, ductile iron pipe, excavation and grading, liens, erosion and sedimentation control, one-call requirements, and laws and regulations.
No. The business must complete the Board’s application, financial, qualifier, and licensing requirements before the license is issued.
