{"product_id":"north-carolina-heating-group-3-technician-exam-book-package","title":"North Carolina Heating Group 3 Technician Exam Book Package","description":"\u003ch1 style=\"color: #d32f2f;\"\u003eNorth Carolina Heating Group 3 Technician Exam Book Package\u003c\/h1\u003e\n\u003cp\u003ePrepare for the North Carolina Heating Group 3 Technician examination with a complete collection of North Carolina code books, HVAC design manuals, refrigeration references, licensing rules, and duct-sizing tools. This exam book package brings together the listed materials used to study forced-air heating and cooling systems, residential and commercial load calculations, duct design, refrigeration principles, fuel-gas requirements, energy conservation, mechanical installations, code administration, and technician responsibilities.\u003c\/p\u003e\n\u003cp\u003eHeating Group 3 covers forced-air heating and cooling systems with a cooling capacity of 15 tons or less. North Carolina offers Class I and Class II technician credentials within this category. Class I applies to qualifying Heating Group 3 work in residential, commercial, and industrial buildings. Class II is limited to qualifying systems in single-family detached dwellings. Candidates should select the technician class that matches the buildings and systems on which they intend to work.\u003c\/p\u003e\n\u003cp\u003eThe North Carolina Heating Group 3 Technician Exam Book Package supports preparation for both code-based and technical questions. The North Carolina Administration Code and Policies addresses permits, inspections, approvals, enforcement procedures, and construction-code administration. The Fuel Gas Code covers fuel-gas piping, appliance connections, combustion air, venting, regulators, valves, and pressure testing. The Mechanical Code addresses heating, cooling, refrigeration, ventilation, duct systems, equipment installation, controls, access, clearances, and mechanical safety.\u003c\/p\u003e\n\u003cp\u003eThe Energy Conservation Code supports study of equipment efficiency, HVAC controls, duct sealing, insulation, piping requirements, and other energy-related provisions. The Residential Code provides requirements affecting heating, cooling, mechanical, and fuel-gas installations in one- and two-family dwellings and townhouses within its scope. The NC Board’s Laws \u0026amp; Rules addresses technician classifications, applicant qualifications, examinations, supervision, license responsibilities, enforcement, and professional conduct.\u003c\/p\u003e\n\u003cp\u003eThe HVAC design and technical references add practical calculation and system knowledge. Manual J supports residential load calculations, while Manual N addresses heating and cooling loads for small commercial buildings. Manual D covers residential duct systems, and Manual Q addresses commercial low-pressure, low-velocity duct design. Modern Refrigeration and Air Conditioning provides broad technical coverage of refrigeration cycles, electrical controls, air conditioning, heating equipment, installation, maintenance, service, and troubleshooting. The ductulator supports airflow and duct-sizing practice.\u003c\/p\u003e\n\u003cp\u003eThis package is designed to help candidates organize a large examination reference library into a practical study resource. Because the examination is open book, candidates should become familiar with every reference before test day. Knowing which publication applies to a question, where major subjects are located, and how to use indexes, tables, definitions, and cross-references can improve efficiency during the examination.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat You Get\u003c\/h2\u003e\n\u003cdiv style=\"border: 3px solid #d32f2f; padding: 20px; margin: 25px 0; background-color: #fff7f7;\"\u003e\n\u003ch3\u003eNorth Carolina Code \u0026amp; Regulatory References\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eNorth Carolina Administration Code and Policies, 2018 Edition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNorth Carolina Fuel Gas Code, 2018 Edition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNorth Carolina Mechanical Code, 2018 Edition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNorth Carolina Energy Conservation Code, 2018 Edition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNorth Carolina Residential Code, 2018 Edition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNC Board’s Laws \u0026amp; Rules – 2026 Edition\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHVAC Design \u0026amp; Technical References\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eManual J – Residential Load Calculations, 2016 Reprint, 8th Full Edition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManual N – Commercial Load Calculation for Small Commercial Buildings, 5th Edition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManual Q – Commercial Low Pressure, Low Velocity Duct System Design (1990)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eManual D – Residential Duct Systems, 2016, 3rd Edition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eModern Refrigeration and Air Conditioning, 22nd Edition\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDuctulator\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Details\u003c\/h2\u003e\n\u003cp\u003eThe North Carolina Heating Group 3 Technician examination is administered under the authority of the North Carolina State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors. The Board establishes applicant qualifications, reviews experience documentation, administers examinations, issues technician credentials, and enforces the laws and rules governing regulated heating work.\u003c\/p\u003e\n\u003cp\u003eApplicants may pursue a Heating Group 3 Class I Technician or Heating Group 3 Class II Technician credential. Class I applies to forced-air heating and cooling systems with a cooling capacity of 15 tons or less in residential, commercial, and industrial buildings. Class II applies to systems within the same capacity range in single-family detached dwellings only.\u003c\/p\u003e\n\u003cp\u003eTechnician applicants must pass the technical and Board laws and rules portions associated with the category and class of license sought. The technical portion evaluates trade knowledge, code application, calculations, equipment principles, and reference use. The laws and rules portion addresses technician licensing, supervision, authorized scope, examinations, responsibilities, prohibited conduct, and Board authority.\u003c\/p\u003e\n\u003cp\u003eExamination topics represented by this package may include forced-air furnaces, heat pumps, air-conditioning systems, refrigeration cycles, compressors, condensers, evaporators, metering devices, refrigerants, electrical controls, airflow, ventilation, duct systems, equipment installation, fuel-gas appliances, combustion air, venting, residential and commercial loads, energy conservation, and code administration.\u003c\/p\u003e\n\u003cp\u003eQuestions may require candidates to locate a code provision, interpret a technical table, follow a load-calculation method, select a duct size, identify an approved installation practice, or evaluate a refrigeration-system condition. Some questions may depend on practical trade knowledge and an understanding of how equipment and controls operate together.\u003c\/p\u003e\n\u003cp\u003eClass I candidates should be prepared to work with both residential and commercial references because their authorized scope includes multiple building types. Class II candidates should emphasize residential materials while still becoming familiar with the full reference list assigned to their approved examination.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eOpen Book Test\u003c\/h2\u003e\n\u003cp\u003eThe North Carolina Heating Group 3 Technician examination is an open-book test. Candidates are required to bring their approved reference materials, manuals, and code books to the examination site. Only the publications listed for the approved examination category may be taken into the testing room.\u003c\/p\u003e\n\u003cp\u003eOpen-book testing still requires concentrated preparation. The number of references makes it impractical to search every publication for every question. Candidates should understand the technical subject, identify the most likely source, locate the controlling section or procedure, and use the reference to confirm the answer.\u003c\/p\u003e\n\u003cp\u003eBegin by reviewing the table of contents, index, chapter layout, definitions, appendices, formulas, and major tables in every book. Learn where the Mechanical Code addresses refrigeration, forced-air heating, cooling equipment, ducts, ventilation, exhaust, access, controls, and installation requirements. Use the Fuel Gas Code for fuel piping, shutoff valves, regulators, appliance connections, combustion air, venting, and pressure testing.\u003c\/p\u003e\n\u003cp\u003eThe Energy Conservation Code should be familiar for questions involving equipment efficiency, controls, duct sealing, insulation, piping, and system performance. Use the Residential Code when a question involves a dwelling within that code’s scope. Use the Administration Code and Policies for permits, inspections, approvals, enforcement, and administrative procedures.\u003c\/p\u003e\n\u003cp\u003eManual J should be used for residential load-calculation questions, while Manual N supports small-commercial load calculations. Manual D applies to residential duct-system design, and Manual Q addresses commercial low-pressure, low-velocity duct systems. Modern Refrigeration and Air Conditioning supports questions involving refrigeration theory, components, electrical systems, service practices, equipment operation, and troubleshooting.\u003c\/p\u003e\n\u003cp\u003eHeating and cooling candidates are expected to furnish a ductulator. Practice using it before the examination to compare airflow, friction rate, velocity, and round or rectangular duct dimensions. The tool should be familiar enough that candidates can concentrate on the question rather than learning how to read it during the test.\u003c\/p\u003e\n\u003cp\u003eApproved reference books must remain in their original published condition. Commercially manufactured permanent index tabs and highlighting may be allowed under current examination rules. Handwritten notes, added formulas, underlining, calculations, homemade tabs, loose papers, unauthorized inserts, and altered materials are restricted. Printed PDF versions are not accepted as substitutes for approved published references.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eLicensing Steps\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelect Class I or Class II.\u003c\/strong\u003e Review the authorized scope of each Heating Group 3 Technician credential and select the class that matches the systems and buildings on which you intend to work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfirm the technician credential is appropriate.\u003c\/strong\u003e A technician license is not an independent contractor license. Technician work must be performed within the authorized scope and under the licensing structure established by the Board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eObtain the examination references.\u003c\/strong\u003e Gather the approved North Carolina codes, Board publication, HVAC design manuals, refrigeration textbook, and ductulator before beginning concentrated preparation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument qualifying experience.\u003c\/strong\u003e Prepare records showing on-site experience in the installation, maintenance, service, or repair of heating systems related to Heating Group 3.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete the technician application.\u003c\/strong\u003e Apply through the North Carolina State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors and identify the requested class.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubmit supporting documentation.\u003c\/strong\u003e Provide the required experience statements, employment records, applicant information, background documentation, fees, signatures, and other materials requested by the Board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceive approval to test.\u003c\/strong\u003e The Board reviews the application and determines whether the applicant meets the qualifications for the requested examination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchedule the examination.\u003c\/strong\u003e Approved candidates receive instructions for arranging the required examination through the designated testing process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePass the required examination portions.\u003c\/strong\u003e Complete the technical and Board laws and rules portions associated with the selected Heating Group 3 Technician class.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete license issuance requirements.\u003c\/strong\u003e Passing the examination is one part of the licensing process. The Board must approve the full application before issuing or activating the technician credential.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eState Requirements\u003c\/h2\u003e\n\u003cp\u003eApplicants for a Heating Group 3 Class I Technician license must document 18 months, or 3,000 hours, of qualifying on-site full-time experience. Applicants for a Heating Group 3 Class II Technician license must document 15 months, or 2,500 hours, of qualifying experience.\u003c\/p\u003e\n\u003cp\u003eThe experience must involve the installation, maintenance, service, or repair of heating systems related to Heating Group 3. Relevant work may include forced-air heating, air conditioning, heat pumps, refrigeration equipment, duct systems, controls, equipment installation, system maintenance, troubleshooting, and repair.\u003c\/p\u003e\n\u003cp\u003eRelated academic or technical training may be considered toward a portion of the experience requirement when it meets the Board’s standards. Applicants seeking education credit should submit the transcripts, certificates, or other records required for review.\u003c\/p\u003e\n\u003cp\u003eExperience documentation should identify the employer, employment dates, total hours, and the type of work performed. The description should clearly show how the experience relates to the requested Heating Group 3 class. Incomplete forms, missing signatures, inconsistent dates, or insufficient descriptions may prevent an applicant from receiving examination approval.\u003c\/p\u003e\n\u003cp\u003eA Heating Group 3 Technician credential does not provide the same authority as a contractor license. A technician may perform and supervise work within the authorized technical scope under the licensing arrangement required by the Board, but the credential does not independently authorize the holder to bid, advertise, contract, or operate as a Heating Group 3 Contractor.\u003c\/p\u003e\n\u003cp\u003eClass I and Class II technicians have different building limitations. Class I applies to qualifying systems in residential, commercial, and industrial buildings. Class II is limited to qualifying work in single-family detached dwellings. Candidates should review these distinctions carefully before submitting an application.\u003c\/p\u003e\n\u003cp\u003eA technician who later meets the experience requirements for the corresponding contractor license may apply through the contractor licensing process. Additional contractor-level requirements apply, including the applicable business examination requirement.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eReference Books\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNorth Carolina Administration Code and Policies, 2018 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThis reference covers permits, inspections, approvals, code administration, enforcement procedures, responsibilities, and statewide policies affecting regulated building and mechanical work.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNorth Carolina Fuel Gas Code, 2018 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe Fuel Gas Code addresses fuel piping, materials, sizing, regulators, shutoff valves, appliance connections, pressure testing, combustion air, venting, and fuel-gas safety requirements.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNorth Carolina Mechanical Code, 2018 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThis primary mechanical reference covers heating, cooling, refrigeration, ventilation, exhaust, duct systems, equipment installation, access, clearances, controls, and mechanical-system safety.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNorth Carolina Energy Conservation Code, 2018 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThis code supports preparation involving HVAC efficiency, equipment controls, duct sealing, insulation, piping requirements, system performance, commissioning, and energy-conservation provisions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNorth Carolina Residential Code, 2018 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe Residential Code contains building, mechanical, fuel-gas, and energy-related requirements for one- and two-family dwellings and townhouses within its scope.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNC Board’s Laws \u0026amp; Rules – 2026 Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThis publication contains the statutes and administrative rules governing North Carolina technician licenses, classifications, experience, examinations, supervision, responsibilities, enforcement, and disciplinary authority.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual J – Residential Load Calculations, 2016 Reprint, 8th Full Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eManual J provides a recognized method for calculating residential heating and cooling loads using building dimensions, construction assemblies, insulation, windows, doors, infiltration, orientation, and design conditions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual N – Commercial Load Calculation for Small Commercial Buildings, 5th Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eManual N supports small-commercial heating and cooling load calculations involving envelope loads, infiltration, ventilation, occupancy, lighting, equipment, and indoor and outdoor design conditions.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual Q – Commercial Low Pressure, Low Velocity Duct System Design (1990)\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eManual Q addresses commercial airflow requirements, available pressure, friction rates, duct dimensions, fitting effects, pressure losses, system layout, and low-pressure duct design.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual D – Residential Duct Systems, 2016, 3rd Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eManual D covers residential airflow allocation, available static pressure, total effective length, friction rate, fitting effects, duct sizing, balancing, and air-distribution design.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModern Refrigeration and Air Conditioning, 22nd Edition\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThis comprehensive technical reference covers refrigeration cycles, compressors, condensers, evaporators, metering devices, refrigerants, electrical controls, heating equipment, air conditioning, installation, service, and troubleshooting.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuctulator\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eA practical HVAC calculation tool used to compare airflow, friction rate, velocity, and round or rectangular duct dimensions during duct-design exercises.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eTest Information and Study Materials\u003c\/h2\u003e\n\u003cp\u003eOrganize preparation around major subject groups: forced-air heating, air conditioning, refrigeration, electrical controls, residential loads, commercial loads, airflow, duct design, fuel gas, ventilation, energy conservation, code administration, and Board laws and rules.\u003c\/p\u003e\n\u003cp\u003eBegin refrigeration study with the basic cycle. Review heat transfer, pressure-temperature relationships, superheat, subcooling, compressors, condensers, evaporators, metering devices, refrigerants, oils, and system controls. Understanding how the complete system operates can make troubleshooting and component questions easier to evaluate.\u003c\/p\u003e\n\u003cp\u003eStudy electrical components as part of the equipment review. Become familiar with motors, relays, contactors, transformers, capacitors, thermostats, pressure controls, safety devices, wiring diagrams, and common control sequences. Focus on how components interact during system operation.\u003c\/p\u003e\n\u003cp\u003ePractice Manual J and Manual N calculations separately. Identify the building type before selecting a method. Gather dimensions, construction assemblies, insulation values, windows, doors, infiltration, ventilation, occupancy, internal gains, and design conditions before beginning the calculation.\u003c\/p\u003e\n\u003cp\u003eUse Manual D, Manual Q, and the ductulator for repeated air-distribution exercises. Practice working with airflow, available static pressure, total effective length, fitting losses, friction rate, velocity, and duct dimensions. Learn to identify which values are provided and which must be calculated or selected.\u003c\/p\u003e\n\u003cp\u003eComplete timed code-navigation exercises throughout the study period. Select a topic, identify likely index terms, locate the controlling provision, and read the full section. Review definitions, exceptions, tables, notes, and cross-references before selecting an answer.\u003c\/p\u003e\n\u003cp\u003eStudy the NC Board’s Laws \u0026amp; Rules separately from the technical references. Licensing questions may address technician classes, experience requirements, applications, examinations, supervision, license scope, professional conduct, enforcement, and disciplinary procedures.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow Contractor Exam Prep Helps You Reach Your Goal\u003c\/h2\u003e\n\u003cp\u003eContractor Exam Prep helps North Carolina Heating Group 3 Technician candidates organize a broad collection of technical codes, design manuals, refrigeration material, licensing rules, and calculation tools into a practical study structure.\u003c\/p\u003e\n\u003cp\u003eOrganized study guidance helps divide the examination into manageable subjects. Candidates can review refrigeration principles, electrical controls, forced-air heating, residential and commercial loads, duct design, fuel gas, mechanical requirements, energy conservation, and Board rules before combining the topics in mixed practice.\u003c\/p\u003e\n\u003cp\u003eTrade-focused review connects individual components to complete HVAC systems. Understanding how compressors, coils, metering devices, fans, ducts, controls, fuel-fired appliances, ventilation, and building loads interact supports stronger technical reasoning.\u003c\/p\u003e\n\u003cp\u003ePractice-oriented preparation emphasizes the skills required for an open-book examination. Candidates should be able to identify the correct reference, locate a technical table or code section, follow a calculation method, recognize an exception, and confirm an answer efficiently.\u003c\/p\u003e\n\u003cp\u003eReference-navigation practice is especially important when residential and commercial questions require different manuals. Learning the purpose and organization of each publication can reduce random searching and help candidates approach technical questions with a consistent method.\u003c\/p\u003e\n\u003cp\u003eContractor Exam Prep supports confidence-building preparation through structured review, repeated calculations, timed lookups, refrigeration study, and ductulator practice. No package can guarantee a particular examination result, but consistent preparation can help candidates enter the test with stronger familiarity and a clearer strategy.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat books are included in the North Carolina Heating Group 3 Technician Exam Book Package?\u003c\/h2\u003e\n\u003cp\u003eThe package includes the listed North Carolina administrative, fuel gas, mechanical, energy conservation, and residential codes; the NC Board’s Laws \u0026amp; Rules; Manuals J, N, Q, and D; Modern Refrigeration and Air Conditioning; and a ductulator.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eIs the North Carolina Heating Group 3 Technician examination open book?\u003c\/h2\u003e\n\u003cp\u003eYes. Candidates bring the approved references assigned to their examination. All books, markings, tabs, and tools must comply with the Board’s current examination requirements.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat work does Heating Group 3 cover?\u003c\/h2\u003e\n\u003cp\u003eHeating Group 3 covers forced-air heating and cooling systems with a cooling capacity of 15 tons or less.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat is the difference between Class I and Class II?\u003c\/h2\u003e\n\u003cp\u003eClass I applies to qualifying systems in residential, commercial, and industrial buildings. Class II is limited to qualifying work in single-family detached dwellings.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow much experience is required for Class I?\u003c\/h2\u003e\n\u003cp\u003eClass I Technician applicants must document 18 months, or 3,000 hours, of qualifying on-site full-time experience.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow much experience is required for Class II?\u003c\/h2\u003e\n\u003cp\u003eClass II Technician applicants must document 15 months, or 2,500 hours, of qualifying experience.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eIs a technician license the same as a contractor license?\u003c\/h2\u003e\n\u003cp\u003eNo. A technician credential does not independently authorize the holder to bid, advertise, contract, or operate as a Heating Group 3 Contractor.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhy are Manual J and Manual N both included?\u003c\/h2\u003e\n\u003cp\u003eManual J addresses residential heating and cooling load calculations. Manual N supports load calculations for small commercial buildings.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhy are Manual D and Manual Q both included?\u003c\/h2\u003e\n\u003cp\u003eManual D covers residential duct-system design. Manual Q addresses commercial low-pressure, low-velocity duct systems.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eDo I need a ductulator?\u003c\/h2\u003e\n\u003cp\u003eHeating and cooling examination candidates are expected to furnish a ductulator and should practice using it before test day.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan I write formulas or notes in the exam books?\u003c\/h2\u003e\n\u003cp\u003eNo. Handwritten notes, formulas, calculations, underlining, loose papers, homemade tabs, unauthorized inserts, and altered reference materials are restricted.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes passing the examination automatically issue the technician license?\u003c\/h2\u003e\n\u003cp\u003eNo. The Board must also approve the applicant’s experience, application, documentation, background information, and remaining licensing requirements.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan a Heating Group 3 Technician later become a contractor?\u003c\/h2\u003e\n\u003cp\u003eA technician who meets the corresponding contractor experience and examination requirements may apply for the contractor credential through the process established by the Board.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes this package guarantee a passing score?\u003c\/h2\u003e\n\u003cp\u003eNo. Examination performance depends on the candidate’s experience, preparation, technical understanding, calculation skills, familiarity with the references, and performance during the test.\u003c\/p\u003e","brand":"1 Exam Prep","offers":[{"title":"Complete Book Set","offer_id":45919396855861,"sku":null,"price":1650.0,"currency_code":"USD","in_stock":true},{"title":"Complete Book Set + Highlighted \u0026 Tabbed [+$800]","offer_id":45919396888629,"sku":null,"price":2450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2522\/1688\/files\/2026NEWPRODUCTS-5-NC-HEATINGG3TECH-BOOKS.jpg?v=1787552691","url":"https:\/\/contractorexampreps.com\/products\/north-carolina-heating-group-3-technician-exam-book-package","provider":"Contractor Exam Preps","version":"1.0","type":"link"}