{"product_id":"north-carolina-asbestos-contractor-exam-highlighted-tabbed-book-package","title":"North Carolina Asbestos Contractor Books Allowed into Exam Package","description":"\u003ch1 style=\"color: #d32f2f;\"\u003eNorth Carolina Asbestos Contractor Books Allowed into Exam Package\u003c\/h1\u003e\n\u003cp\u003ePrepare for the North Carolina S(Asbestos) Contractor examination with the three references approved for use in the examination center. This focused exam-book package covers asbestos engineering controls, occupational exposure requirements, regulated work practices, respiratory protection, protective equipment, containment methods, and the safety principles associated with asbestos renovation and demolition work.\u003c\/p\u003e\n\u003cp\u003eThe North Carolina S(Asbestos) classification applies to renovation or demolition activities involving the repair, maintenance, removal, isolation, encapsulation, or enclosure of regulated asbestos-containing material. The classification covers this work in commercial, industrial, institutional, and residential buildings when regulated asbestos-containing material is involved.\u003c\/p\u003e\n\u003cp\u003eAsbestos contracting requires careful control of airborne fibers and strict attention to worker protection, containment, respiratory equipment, decontamination, regulated areas, work methods, and waste handling. Candidates should be prepared to interpret technical information and apply safe work practices to different project conditions.\u003c\/p\u003e\n\u003cp\u003eThis package includes the official references identified for the North Carolina S(Asbestos) examination. Each reference supports a different part of the exam. \u003cem\u003eAsbestos: Engineering Management and Control\u003c\/em\u003e provides broad technical coverage of asbestos management and abatement methods. OSHA 29 CFR 1910.1001 establishes occupational asbestos requirements. \u003cem\u003eRespiratory Protection Frequently Asked Questions\u003c\/em\u003e supports review of respirator selection, use, limitations, fit, maintenance, and worker protection.\u003c\/p\u003e\n\u003cp\u003eThe examination is open book, but candidates should not expect to locate every answer without advance preparation. The test contains 60 questions and allows 120 minutes, giving candidates an average of approximately two minutes per question. Efficient reference navigation is therefore an important part of exam readiness.\u003c\/p\u003e\n\u003cp\u003eCandidates should study the organization of each reference, identify major sections, and practice locating technical requirements under timed conditions. Understanding the material is just as important as finding it. Questions may require candidates to compare work practices, recognize unsafe conditions, apply exposure-control principles, or determine the correct response to a project scenario.\u003c\/p\u003e\n\u003cp\u003eThis product includes the three references listed below. It does not include an online course, highlighted books, tabbed books, application service, licensing fees, asbestos training, accreditation, project permits, or examination registration unless another product package specifically states that those services are included.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Details\u003c\/h2\u003e\n\u003cp\u003eThe North Carolina S(Asbestos) Contractor examination is administered for the North Carolina Licensing Board for General Contractors through computer-based testing.\u003c\/p\u003e\n\u003cp\u003eThe examination contains 60 questions. Candidates are allowed 120 minutes to complete the test and must earn a score of at least 70% to pass.\u003c\/p\u003e\n\u003cp\u003eThe official examination content outline divides the test into six subject areas:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral Asbestos:\u003c\/strong\u003e 18 questions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRespirators:\u003c\/strong\u003e 10 questions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini Enclosures and Glove Bag:\u003c\/strong\u003e 5 questions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMethods and Means:\u003c\/strong\u003e 24 questions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaws and Regulations:\u003c\/strong\u003e 2 questions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiens:\u003c\/strong\u003e 1 question\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMethods and Means is the largest examination category. Candidates should be prepared to review practical procedures used to control asbestos fibers, establish regulated work areas, isolate work zones, protect workers, remove or manage asbestos-containing material, and complete cleanup activities.\u003c\/p\u003e\n\u003cp\u003eGeneral Asbestos questions may address asbestos characteristics, health hazards, terminology, exposure concerns, building materials, project evaluation, engineering controls, and recognized management principles.\u003c\/p\u003e\n\u003cp\u003eRespirator questions may involve respirator types, protection factors, fit testing, medical evaluation, limitations, inspection, cleaning, storage, maintenance, worker responsibilities, and employer obligations.\u003c\/p\u003e\n\u003cp\u003eMini-enclosure and glove-bag questions may address the conditions under which these methods are used, preparation procedures, containment, negative pressure, worker protection, removal techniques, cleanup, and disposal.\u003c\/p\u003e\n\u003cp\u003eQuestions involving laws and regulations may test a candidate’s ability to recognize regulatory responsibilities associated with general contracting and asbestos work. The examination may also include trade-knowledge or general-industry-practice questions that are not answered through a simple word-for-word lookup.\u003c\/p\u003e\n\u003cp\u003eA silent, non-printing, non-programmable calculator may be used in the examination center. Candidates may request a magnifying glass at the testing location.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eOpen Book Test\u003c\/h2\u003e\n\u003cp\u003eThe North Carolina S(Asbestos) Contractor examination is open book. Candidates are responsible for bringing their own approved references to the examination center.\u003c\/p\u003e\n\u003cp\u003eOnly the references specifically allowed for the S(Asbestos) examination should be taken into the testing room. Candidates should bring complete publications rather than partial excerpts.\u003c\/p\u003e\n\u003cp\u003eReference materials may be highlighted, underlined, or indexed before the examination. Books may be prepared with permanent tabs that cannot be easily removed from the page. Removable tabs, page flags, and similar temporary markers are not permitted.\u003c\/p\u003e\n\u003cp\u003eNo notes may be written on the tabs. References may not be written in before or during the examination session. Candidates may not place loose sheets, attached notes, handwritten material, or additional papers inside the approved references.\u003c\/p\u003e\n\u003cp\u003eDownloaded reference material must be properly bound before it is brought into the testing center. Loose or partial printed references are not accepted as exam materials.\u003c\/p\u003e\n\u003cp\u003eOpen-book preparation should include repeated practice with the actual approved references. Candidates should learn where major topics are located and how the terminology used in one reference relates to the others.\u003c\/p\u003e\n\u003cp\u003eUseful lookup exercises include locating permissible exposure requirements, regulated-area rules, respiratory-protection provisions, hygiene practices, protective clothing requirements, engineering controls, warning signs, training responsibilities, medical surveillance provisions, and cleanup procedures.\u003c\/p\u003e\n\u003cp\u003eCandidates should avoid spending too much time on a single question. When a lookup becomes difficult, it may be more effective to mark the question, continue through the examination, and return to it after completing easier items.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eLicensing Steps\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eReview the S(Asbestos) classification.\u003c\/strong\u003e Confirm that the specialty classification matches the asbestos renovation or demolition work the business intends to perform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply through the North Carolina Licensing Board for General Contractors.\u003c\/strong\u003e Submit the applicable license application or examination request and provide the required applicant and qualifier information.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceive examination eligibility.\u003c\/strong\u003e After the Board approves the request, the candidate receives authorization and instructions for scheduling the examination.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare with the approved references.\u003c\/strong\u003e Study general asbestos principles, respiratory protection, glove-bag methods, mini enclosures, work practices, laws, and lien-related topics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePractice open-book navigation.\u003c\/strong\u003e Complete timed searches using the three approved examination references.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSchedule the examination.\u003c\/strong\u003e Use the eligibility instructions to select a computer-based testing appointment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePass the S(Asbestos) examination.\u003c\/strong\u003e Complete the 60-question examination within the 120-minute testing period and earn the required passing score.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete the contractor license process.\u003c\/strong\u003e Provide the financial, business, qualifier, and organizational information required for the requested license limitation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAddress asbestos accreditation requirements.\u003c\/strong\u003e Individuals performing regulated asbestos-management activities must hold the applicable North Carolina asbestos accreditation for their work responsibilities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete project-specific requirements.\u003c\/strong\u003e Asbestos removal and demolition projects may require notifications, permits, trained personnel, and compliance with state and federal asbestos regulations.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eState Requirements\u003c\/h2\u003e\n\u003cp\u003eThe North Carolina Licensing Board for General Contractors regulates the S(Asbestos) contractor classification. The classification covers renovation and demolition activities involving regulated asbestos-containing material in commercial, industrial, institutional, and residential buildings.\u003c\/p\u003e\n\u003cp\u003eApplicants must complete the licensing process established by the Board. Examination eligibility is issued after the Board reviews and approves the applicable application or examination request.\u003c\/p\u003e\n\u003cp\u003eThe individual who passes the examination serves as the qualifier for the license. The business must also satisfy the requirements associated with its requested license limitation and organizational structure.\u003c\/p\u003e\n\u003cp\u003eNorth Carolina general contractor licenses are issued with monetary limitations that control the value of projects the licensee may undertake. Applicants must meet the financial requirements associated with the requested limitation.\u003c\/p\u003e\n\u003cp\u003eContractor licensing and asbestos accreditation are separate requirements. The general contractor license authorizes contracting within the approved classification and limitation, while asbestos accreditation applies to individuals performing specific asbestos-management activities.\u003c\/p\u003e\n\u003cp\u003eThe North Carolina asbestos program accredits individuals involved in asbestos inspection, management planning, project design, supervision, air monitoring, and removal activities. The accreditation required depends on the person’s duties.\u003c\/p\u003e\n\u003cp\u003eAsbestos renovation and demolition projects may also require project notification or permitting through the state asbestos program. Contractors must follow applicable requirements for regulated asbestos-containing material, worker protection, emissions control, waste handling, and disposal.\u003c\/p\u003e\n\u003cp\u003ePassing the contractor examination does not replace required asbestos training or individual accreditation. It also does not automatically issue a contractor license. Applicants must complete the Board’s full licensing process and satisfy the applicable financial, organizational, and qualifier requirements.\u003c\/p\u003e\n\u003cp\u003eLicensed contractors and accredited asbestos professionals remain responsible for complying with OSHA requirements, North Carolina asbestos rules, project notification requirements, and any other standards that apply to the work.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Room Approved Books\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAsbestos: Engineering Management and Control, Kenneth Cherry, 1988\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eA technical asbestos reference covering hazard recognition, engineering controls, management practices, abatement planning, containment, removal methods, worker protection, project administration, and control of asbestos-containing materials.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e29 CFR 1910.1001 - Asbestos, Occupational Safety and Health Administration\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe federal occupational asbestos standard addressing exposure limits, regulated areas, engineering controls, work practices, respiratory protection, protective clothing, hygiene facilities, communication of hazards, training, medical surveillance, and employer responsibilities.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRespiratory Protection Frequently Asked Questions, Occupational Safety and Health Administration\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eAn OSHA respiratory-protection resource addressing respirator programs, medical evaluations, fit testing, respirator selection, proper use, maintenance, inspection, cleaning, storage, limitations, and worker protection.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eTest Information and Study Materials\u003c\/h2\u003e\n\u003cp\u003eBegin preparation with the examination outline. Since Methods and Means contains 24 questions, candidates should devote substantial study time to work practices, containment, removal methods, engineering controls, cleanup, and project procedures.\u003c\/p\u003e\n\u003cp\u003eGeneral Asbestos is also a major category. Review the properties of asbestos, common asbestos-containing materials, routes of exposure, health risks, fiber-release concerns, project assessment, and the purpose of different control methods.\u003c\/p\u003e\n\u003cp\u003eRespiratory protection should be studied as a complete program rather than as a list of respirator types. Candidates should understand why medical evaluation and fit testing are required, how respirators are selected, what affects performance, and how equipment must be inspected and maintained.\u003c\/p\u003e\n\u003cp\u003eGlove-bag and mini-enclosure preparation should include setup, isolation, negative pressure, worker entry, material handling, removal methods, decontamination, cleanup, and disposal. Candidates should recognize when a method is appropriate and when additional controls may be required.\u003c\/p\u003e\n\u003cp\u003eUse timed study sessions to reflect the two-hour exam period. A practical drill may include 30 questions in 60 minutes or 15 questions in 30 minutes. This helps candidates identify whether they are spending too long on technical lookups.\u003c\/p\u003e\n\u003cp\u003eCreate a reference map for each book. Record where respiratory protection, exposure control, regulated areas, work practices, protective clothing, hygiene, training, and medical surveillance are located. The map should be used during study rather than placed inside the exam references.\u003c\/p\u003e\n\u003cp\u003ePractice answering questions from the surrounding context instead of searching only for identical wording. Examination questions may describe a work condition and require the candidate to determine which method, control, or protective measure applies.\u003c\/p\u003e\n\u003cp\u003eReview incorrect answers directly in the references. Locate the supporting provision, read the surrounding material, and identify why the selected answer was incorrect. This approach builds technical understanding and improves future lookup speed.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow Contractor Exam Prep Helps You Reach Your Goal\u003c\/h2\u003e\n\u003cp\u003eContractor Exam Prep helps North Carolina asbestos contractor candidates organize the approved examination references into a focused study plan. Preparation can be divided into general asbestos knowledge, respiratory protection, mini enclosures, glove-bag work, methods and means, laws, and lien concepts.\u003c\/p\u003e\n\u003cp\u003eTrade-focused review helps candidates connect regulatory language with the practical responsibilities of asbestos contractors. This includes containment, engineering controls, worker protection, regulated areas, decontamination, respiratory equipment, removal procedures, cleanup, and project safety.\u003c\/p\u003e\n\u003cp\u003ePractice-oriented preparation encourages candidates to answer questions, locate the supporting material, review missed concepts, and repeat difficult searches. This process improves both technical knowledge and open-book navigation.\u003c\/p\u003e\n\u003cp\u003eReference-navigation practice helps candidates learn how the three approved materials work together. OSHA provisions may establish a requirement, while the engineering-management reference may provide broader context for applying that requirement on a project.\u003c\/p\u003e\n\u003cp\u003eA structured study routine can help candidates manage the 60-question examination and two-hour time limit with greater confidence. No book package can guarantee a passing score, contractor license, accreditation, permit, or project approval. Results depend on the candidate’s preparation, experience, reference familiarity, application qualifications, and test-day performance.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eFAQ Section\u003c\/h2\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eIs this package for the North Carolina S(Asbestos) Contractor examination?\u003c\/h2\u003e\n\u003cp\u003eYes. It contains the three references identified as allowed materials for the North Carolina S(Asbestos) examination.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eIs the North Carolina asbestos contractor examination open book?\u003c\/h2\u003e\n\u003cp\u003eYes. Candidates may bring the approved references into the examination center when the materials comply with the testing rules.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow many questions are on the examination?\u003c\/h2\u003e\n\u003cp\u003eThe S(Asbestos) examination contains 60 questions.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow much time is allowed?\u003c\/h2\u003e\n\u003cp\u003eCandidates are allowed 120 minutes to complete the examination.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat score is required to pass?\u003c\/h2\u003e\n\u003cp\u003eA score of at least 70% is required.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhich subject has the most questions?\u003c\/h2\u003e\n\u003cp\u003eMethods and Means is the largest category with 24 questions, followed by General Asbestos with 18 questions.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan the references be highlighted?\u003c\/h2\u003e\n\u003cp\u003eYes. Approved references may be highlighted, underlined, or indexed before the examination.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eAre removable tabs allowed?\u003c\/h2\u003e\n\u003cp\u003eNo. Tabs must be permanently attached and may not contain notes.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan printed OSHA materials be taken into the exam?\u003c\/h2\u003e\n\u003cp\u003eApproved downloaded materials must be complete and properly bound. Loose pages and partial references are not accepted.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes passing the examination provide asbestos accreditation?\u003c\/h2\u003e\n\u003cp\u003eNo. Contractor licensing and individual asbestos accreditation are separate. Individuals performing regulated asbestos-management activities must hold the accreditation required for their duties.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes the package include a course or application service?\u003c\/h2\u003e\n\u003cp\u003eNo. This product includes the three approved examination references only. Courses and application services are included only when specifically stated in another package.\u003c\/p\u003e\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes purchasing the books guarantee a passing score or license?\u003c\/h2\u003e\n\u003cp\u003eNo. Passing and licensing depend on the candidate’s preparation, experience, qualifications, reference-navigation ability, application completion, and examination performance.\u003c\/p\u003e","brand":"1 Exam Prep","offers":[{"title":"Default Title","offer_id":45919395053621,"sku":null,"price":300.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2522\/1688\/files\/2026NEWPRODUCTS-7-NC-ASBESTOS-BOOKS.jpg?v=1787552653","url":"https:\/\/contractorexampreps.com\/products\/north-carolina-asbestos-contractor-exam-highlighted-tabbed-book-package","provider":"Contractor Exam Preps","version":"1.0","type":"link"}