{"product_id":"mississippi-welding-contractor-exam-complete-highlighted-tabbed-book-package","title":"Mississippi Welding Contractor Exam Complete Highlighted \u0026 Tabbed Book Package","description":"\u003ch1 style=\"color: #d32f2f;\"\u003eMississippi Welding Contractor Exam Complete Highlighted \u0026amp; Tabbed Book Package\u003c\/h1\u003e\n\n\u003cp\u003ePrepare for the Mississippi Welding contractor examination with a complete set of professionally highlighted and permanently tabbed reference books. This package includes the two approved technical references associated with the Mississippi Welding trade exam, organized to support focused study and efficient open-book navigation.\u003c\/p\u003e\n\n\u003cp\u003eThe Mississippi Welding Contractor Exam Complete Highlighted \u0026amp; Tabbed Book Package includes \u003cem\u003eModern Welding\u003c\/em\u003e, 2013, 11th Edition, and \u003cem\u003ePipe Welding Procedures\u003c\/em\u003e, 2003. Together, these books support preparation for oxyacetylene welding and cutting, blueprint and plan reading, brazing, pipe welding, welding materials, shielded metal arc welding, gas tungsten arc welding, testing, and inspection.\u003c\/p\u003e\n\n\u003cp\u003eEach book is professionally \u003cstrong\u003ehighlighted and permanently tabbed\u003c\/strong\u003e. The highlighting draws attention to useful definitions, procedures, diagrams, welding variables, material information, equipment guidance, joint configurations, inspection concepts, and other important trade topics. Permanent tabs provide visible navigation points for major chapters and frequently reviewed subjects.\u003c\/p\u003e\n\n\u003cp\u003ePreparing an open-book reference set independently can require substantial time. Candidates must review hundreds of pages, identify relevant sections, and create a tab system that remains easy to use under exam conditions. This package arrives prepared so students can move directly into technical review and reference-navigation practice.\u003c\/p\u003e\n\n\u003cp\u003eThe Mississippi State Board of Contractors identifies Welding as a tested specialty classification. The official exam scope is unlimited welding work. Candidates should be prepared to demonstrate broad welding knowledge rather than focusing on only one process, metal, joint type, or application.\u003c\/p\u003e\n\n\u003cp\u003eThis listing includes the complete highlighted and tabbed trade-exam book package only. Online course access, book rental, application service, business formation, and Mississippi Law and Business Management materials are not included.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePlease allow up to 15 business days for tabbed and highlighted book package orders.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Details\u003c\/h2\u003e\n\n\u003cp\u003eThe Mississippi Welding contractor examination is administered by PSI after the Mississippi State Board of Contractors establishes the candidate’s eligibility. Applicants must complete the appropriate contractor licensing application before scheduling the examination.\u003c\/p\u003e\n\n\u003cp\u003eThe Welding examination contains \u003cstrong\u003e60 questions\u003c\/strong\u003e. Candidates receive \u003cstrong\u003e2 hours\u003c\/strong\u003e to complete the test and must earn a minimum score of \u003cstrong\u003e70 percent\u003c\/strong\u003e to pass.\u003c\/p\u003e\n\n\u003cp\u003eThe official examination content outline includes the following subjects:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOxyacetylene Welding and Cutting:\u003c\/strong\u003e 11 questions covering equipment, gases, flame adjustment, welding methods, cutting methods, setup, operating practices, and related trade knowledge.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlueprint and Plan Reading:\u003c\/strong\u003e 6 questions involving welding symbols, dimensions, joint details, drawings, specifications, and interpretation of project documents.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrazing:\u003c\/strong\u003e 5 questions addressing filler metals, fluxes, joint preparation, heating, equipment, techniques, and brazing procedures.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Welding:\u003c\/strong\u003e 6 questions covering pipe preparation, alignment, joint design, welding positions, root passes, filler passes, cover passes, and procedural considerations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e 10 questions involving base metals, electrodes, filler metals, gases, material identification, selection, characteristics, and handling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShielded Metal Arc Welding:\u003c\/strong\u003e 9 questions addressing equipment, polarity, electrode classifications, joint preparation, positions, technique, and operating variables.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGas Tungsten Arc Welding:\u003c\/strong\u003e 9 questions involving equipment, current selection, shielding gases, tungsten electrodes, filler metals, technique, and common applications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTesting and Inspection:\u003c\/strong\u003e 4 questions covering weld quality, discontinuities, visual inspection, destructive testing, nondestructive testing, and evaluation concepts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eMaterials and oxyacetylene welding and cutting account for 21 of the examination’s 60 questions. Shielded metal arc welding and gas tungsten arc welding account for another 18 questions. Candidates should give these areas substantial attention while still preparing thoroughly for pipe welding, blueprints, brazing, testing, and inspection.\u003c\/p\u003e\n\n\u003cp\u003eThe examination may include questions developed from the approved references as well as questions based on trade knowledge and general industry practices. Candidates should understand welding principles and procedures instead of depending entirely on finding every answer in the books.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eOpen Book Test\u003c\/h2\u003e\n\n\u003cp\u003eThe Mississippi Welding contractor examination is an \u003cstrong\u003eopen-book test\u003c\/strong\u003e. Candidates are responsible for bringing the authorized references to the examination center and following the current PSI rules for exam-room materials.\u003c\/p\u003e\n\n\u003cp\u003eApproved references may be highlighted, underlined, and indexed before the examination. Permanent tabs are allowed. Temporary tabs, removable notes, loose papers, and unauthorized attached materials are not permitted. Candidates may not write in the references during the examination session.\u003c\/p\u003e\n\n\u003cp\u003eThe two books in this package arrive professionally highlighted and permanently tabbed. The prepared references help candidates move between general welding information and specialized pipe-welding procedures without beginning with an unorganized set of books.\u003c\/p\u003e\n\n\u003cp\u003eOpen-book testing still requires preparation and time management. With 60 questions and two hours available, candidates have an average of approximately two minutes per question. Searching both references for every answer can make it difficult to complete the examination within the allotted time.\u003c\/p\u003e\n\n\u003cp\u003eCandidates should practice identifying the subject before opening a book. A question involving oxyfuel equipment, welding symbols, electrodes, brazing, gas tungsten arc welding, or inspection may lead to \u003cem\u003eModern Welding\u003c\/em\u003e. A detailed question involving pipe preparation, root passes, positions, electrode manipulation, or pipe procedures may lead to \u003cem\u003ePipe Welding Procedures\u003c\/em\u003e.\u003c\/p\u003e\n\n\u003cp\u003eUse the permanent tabs together with each book’s table of contents, index, chapter headings, illustrations, and technical terminology. Repeated navigation practice can help candidates locate information more efficiently and become comfortable with the exact copies they plan to take into the testing center.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eLicensing Steps\u003c\/h2\u003e\n\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReview the Welding classification.\u003c\/strong\u003e Confirm that the Mississippi specialty classification matches the welding work the applicant or contracting company intends to perform.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChoose the appropriate application.\u003c\/strong\u003e Complete the commercial or residential contractor application that applies to the planned work and licensing situation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesignate a qualifying individual.\u003c\/strong\u003e Identify the person who will complete the examinations assigned to the contractor applicant.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGather supporting documents.\u003c\/strong\u003e Prepare the business, ownership, qualifying-party, experience, insurance, and other materials required by the Mississippi State Board of Contractors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSubmit the application.\u003c\/strong\u003e Send the completed application and supporting documentation to the Board for review.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRespond to application requests.\u003c\/strong\u003e Provide any missing documents, corrections, or additional information requested during the review process.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReceive examination eligibility.\u003c\/strong\u003e The Board determines which examinations the qualifying individual must complete and sends eligibility information to PSI.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReceive PSI confirmation.\u003c\/strong\u003e Wait for the eligibility notice and scheduling instructions before registering for the examination.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrepare with the approved references.\u003c\/strong\u003e Use the highlighted and tabbed books to review technical subjects and practice locating information under timed conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTake the assigned examinations.\u003c\/strong\u003e Bring acceptable identification and the authorized reference books while following PSI’s examination-center procedures.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete the remaining licensing requirements.\u003c\/strong\u003e Passing an examination is one part of the process. The complete application must be reviewed and approved before a contractor license is issued.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eState Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe Mississippi State Board of Contractors regulates commercial contractors, residential contractors, roofers, and specialty contractor classifications. Welding is identified as a tested specialty classification with a scope of unlimited welding work.\u003c\/p\u003e\n\n\u003cp\u003eApplicants must submit the appropriate contractor license application before testing. The Board reviews the application, requested classification, qualifying-party information, business information, and supporting documentation before establishing examination eligibility.\u003c\/p\u003e\n\n\u003cp\u003eEach company seeking licensure must designate a qualifying individual to complete the examinations. The qualifying individual must maintain the relationship with the licensed company required by the Board. Proof of employment, ownership, officer status, or another acceptable relationship may be required.\u003c\/p\u003e\n\n\u003cp\u003eNew applicants generally receive six months from the date of eligibility to complete the required examinations. Candidates may retest during the eligibility period. Applicants who do not pass within the authorized period may be required to reapply with the Board.\u003c\/p\u003e\n\n\u003cp\u003eThe Board determines which examinations apply to each applicant. A Mississippi Law and Business Management examination may also be required as part of the contractor licensing process. This product includes only the two technical references for the Welding trade examination.\u003c\/p\u003e\n\n\u003cp\u003ePassing the trade examination does not automatically create a contractor license. Applicants must satisfy all applicable application, documentation, qualification, examination, and Board-review requirements before receiving approval.\u003c\/p\u003e\n\n\u003cp\u003eAfter licensing, the contractor must operate within the scope of the issued classification and keep required business and qualifying-party information current. A Welding classification should not be represented as authority to perform unrelated work outside the classification approved by the Board.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eReference Books\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eModern Welding, 2013, 11th Edition\u003c\/strong\u003e\u003cbr\u003e\n    \u003cspan\u003eThis comprehensive trade reference supports preparation for welding processes, equipment, metals, safety practices, joint design, blueprint interpretation, welding symbols, filler metals, electrodes, oxyfuel welding and cutting, brazing, shielded metal arc welding, gas tungsten arc welding, testing, and inspection. The book is professionally highlighted and permanently tabbed to support focused review and efficient navigation.\u003c\/span\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003ePipe Welding Procedures, 2003\u003c\/strong\u003e\u003cbr\u003e\n    \u003cspan\u003eThis specialized reference focuses on pipe-welding methods and field procedures. It supports study of pipe preparation, alignment, joint design, welding positions, tack welds, root passes, filler passes, cover passes, electrode handling, welding variables, troubleshooting, and procedures used to produce sound pipe welds. The book is professionally highlighted and permanently tabbed.\u003c\/span\u003e\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe books serve complementary roles. \u003cem\u003eModern Welding\u003c\/em\u003e provides broad preparation across the official examination outline, while \u003cem\u003ePipe Welding Procedures\u003c\/em\u003e offers more detailed guidance for pipe joints, positions, passes, and procedural techniques.\u003c\/p\u003e\n\n\u003cp\u003eCandidates should use the official content outline to connect topics across both references. Questions involving pipe materials, electrode selection, joint preparation, welding position, inspection, or procedure selection may require information found in either book.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Room Approved Books\u003c\/h2\u003e\n\n\u003cp\u003eThe following professionally highlighted and permanently tabbed references are approved for use during the Mississippi Welding contractor examination:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eModern Welding, 2013, 11th Edition\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003ePipe Welding Procedures, 2003\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCandidates are responsible for bringing their own approved references to the testing center. Books may be inspected before the examination begins.\u003c\/p\u003e\n\n\u003cp\u003eThe permanent tabs in this package create an organized indexing system without relying on removable notes. Temporary tabs, Post-it-style products, loose study sheets, and unauthorized inserts are not permitted in the testing room.\u003c\/p\u003e\n\n\u003cp\u003eCandidates may review, highlight, underline, and index approved references before the examination, but they may not write in the books during testing. Practicing with the same highlighted and tabbed copies before exam day can help candidates become familiar with their page layouts and navigation system.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eTest Information and Study Materials\u003c\/h2\u003e\n\n\u003cp\u003eBegin preparation by reviewing the eight official examination subjects and assigning study time to each one. Create separate review sessions for oxyacetylene welding and cutting, blueprints, brazing, pipe welding, materials, shielded metal arc welding, gas tungsten arc welding, and inspection.\u003c\/p\u003e\n\n\u003cp\u003eUse \u003cem\u003eModern Welding\u003c\/em\u003e to study oxyfuel equipment, gases, flame characteristics, cutting methods, welding processes, current, polarity, electrodes, shielding gases, base metals, filler metals, joint designs, welding positions, symbols, discontinuities, and inspection methods.\u003c\/p\u003e\n\n\u003cp\u003eUse \u003cem\u003ePipe Welding Procedures\u003c\/em\u003e to strengthen knowledge of pipe preparation and field techniques. Review bevels, root openings, alignment, tack welds, pipe positions, root-pass control, filler passes, cover passes, electrode angles, travel speed, current, and common pipe-welding problems.\u003c\/p\u003e\n\n\u003cp\u003eBlueprint preparation should include standard welding symbols, reference lines, arrows, dimensions, joint types, groove details, finish symbols, field-weld symbols, and information shown on plans. Practice translating a drawing or symbol into the procedure and joint configuration it represents.\u003c\/p\u003e\n\n\u003cp\u003eMaterials preparation should cover base-metal characteristics, electrode classifications, filler-metal selection, gases, fluxes, storage, handling, and the effects of material thickness and composition. Candidates should understand how material selection affects joint preparation, preheating, current, polarity, and welding technique.\u003c\/p\u003e\n\n\u003cp\u003eTesting and inspection review should include visual examination, weld profiles, penetration, fusion, porosity, cracks, undercut, overlap, inclusions, and other discontinuities. Become familiar with the purposes of common destructive and nondestructive testing methods.\u003c\/p\u003e\n\n\u003cp\u003eComplete practice questions under timed conditions. Answer familiar questions first, mark questions that require reference research, and return to them after the initial pass. When using a book, select the most likely reference before beginning the search.\u003c\/p\u003e\n\n\u003cp\u003eReview missed questions carefully. Determine whether the error came from limited technical knowledge, confusion about a welding process, misreading a symbol, choosing the wrong electrode, overlooking a procedure step, or taking too long to locate the answer.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow Contractor Exam Prep Helps You Reach Your Goal\u003c\/h2\u003e\n\n\u003cp\u003eContractor Exam Prep supports Mississippi Welding candidates with professionally organized references designed for focused study and efficient open-book navigation. The highlighting helps direct attention to useful technical information, while permanent tabs provide visible access points for major exam subjects.\u003c\/p\u003e\n\n\u003cp\u003eThe prepared books reduce the setup work normally required before study begins. Candidates can focus on welding principles, pipe procedures, materials, symbols, processes, and inspection topics instead of spending extensive time building their own highlighting and tab system.\u003c\/p\u003e\n\n\u003cp\u003eTrade-focused review can be organized around the official examination outline. Candidates can divide preparation into manageable subjects and use the prepared references to locate supporting explanations, diagrams, procedures, and examples.\u003c\/p\u003e\n\n\u003cp\u003ePractice-oriented preparation helps candidates apply information rather than relying only on passive reading. Working through questions can reveal weak areas, improve technical interpretation, and strengthen the ability to recognize which reference applies to a particular topic.\u003c\/p\u003e\n\n\u003cp\u003eReference-navigation practice is particularly important for an open-book test. Familiarity with the highlighted sections, permanent tabs, indexes, chapter headings, and illustrations can help candidates approach test day with a clearer strategy.\u003c\/p\u003e\n\n\u003cp\u003eNo book package guarantees a passing examination score, licensing eligibility, or contractor license. The package provides an organized reference foundation designed to support consistent study, technical review, and more confident book navigation.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eFAQ Section\u003c\/h2\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat books are included in this package?\u003c\/h2\u003e\n\n\u003cp\u003eThe package includes \u003cem\u003eModern Welding\u003c\/em\u003e, 2013, 11th Edition, and \u003cem\u003ePipe Welding Procedures\u003c\/em\u003e, 2003.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eAre the books highlighted and tabbed?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Both references are professionally highlighted and permanently tabbed for organized study and efficient exam-room navigation.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow long will the book package take to prepare?\u003c\/h2\u003e\n\n\u003cp\u003ePlease allow up to 15 business days for tabbed and highlighted book package orders.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eIs the Mississippi Welding examination open book?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Candidates may bring the two approved references into the examination center, subject to PSI’s current testing rules.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow many questions are on the Welding exam?\u003c\/h2\u003e\n\n\u003cp\u003eThe examination contains 60 questions. Candidates receive two hours and must earn a minimum score of 70 percent.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat topics are covered on the examination?\u003c\/h2\u003e\n\n\u003cp\u003eThe exam covers oxyacetylene welding and cutting, blueprint and plan reading, brazing, pipe welding, materials, shielded metal arc welding, gas tungsten arc welding, testing, and inspection.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eAre permanent tabs allowed in the testing center?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Approved references may be indexed with permanent tabs. Temporary tabs and removable notes are not permitted.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan I write in the books during the exam?\u003c\/h2\u003e\n\n\u003cp\u003eNo. References may be prepared before testing, but candidates may not write in them during the examination.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes this package include an online course?\u003c\/h2\u003e\n\n\u003cp\u003eNo. This listing includes the complete highlighted and tabbed Welding trade-exam book package only.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes this package include the Mississippi business and law book?\u003c\/h2\u003e\n\n\u003cp\u003eNo. The Mississippi Law and Business Management reference is not included in this trade-exam package.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eAre these rental books?\u003c\/h2\u003e\n\n\u003cp\u003eNo rental period or refundable deposit is included. This listing is presented as a complete highlighted and tabbed book package.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes purchasing this package guarantee that I will pass?\u003c\/h2\u003e\n\n\u003cp\u003eNo. The prepared books support exam study and navigation, but results depend on the candidate’s welding knowledge, preparation, time management, and examination performance.\u003c\/p\u003e\n","brand":"1 Exam Prep","offers":[{"title":"Default Title","offer_id":45919398690869,"sku":null,"price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2522\/1688\/files\/MS-WELDING-HT.jpg?v=1787552757","url":"https:\/\/contractorexampreps.com\/products\/mississippi-welding-contractor-exam-complete-highlighted-tabbed-book-package","provider":"Contractor Exam Preps","version":"1.0","type":"link"}