{"product_id":"mississippi-welding-contractor-exam-book-package","title":"Mississippi Welding Contractor Exam Book Package","description":"\u003ch1 style=\"color: #d32f2f;\"\u003eMississippi Welding Contractor Exam Book Package\u003c\/h1\u003e\n\n\u003cp\u003ePrepare for the Mississippi Welding contractor examination with a focused reference package containing the two books listed for the trade exam. The Mississippi Welding Contractor Exam Book Package brings together \u003cem\u003eModern Welding\u003c\/em\u003e, 2013, and \u003cem\u003ePipe Welding Procedures\u003c\/em\u003e, 2003, giving candidates a practical foundation for reviewing welding processes, materials, pipe procedures, blueprint reading, brazing, testing, inspection, and related trade knowledge.\u003c\/p\u003e\n\n\u003cp\u003eThe Mississippi State Board of Contractors identifies Welding as a tested specialty classification. The classification involves all aspects of welding, including oxyacetylene welding and cutting, brazing, and pipe welding. Candidates pursuing this classification should be prepared to demonstrate knowledge across several welding methods rather than concentrating on only one process or application.\u003c\/p\u003e\n\n\u003cp\u003eThe examination covers subjects such as oxyacetylene welding and cutting, blueprint and plan reading, brazing, pipe welding, welding materials, shielded metal arc welding, gas tungsten arc welding, and testing and inspection. The two included references support study across these areas through explanations of equipment, techniques, terminology, joints, positions, electrodes, filler metals, safety practices, pipe preparation, and welding procedures.\u003c\/p\u003e\n\n\u003cp\u003eThis package provides the standard trade-exam reference books. The product title does not include highlighted books, permanent tabs, rental terms, online course access, licensing application service, or business setup services. Candidates seeking those features should select a package that specifically lists them.\u003c\/p\u003e\n\n\u003cp\u003eOwning the books is only the beginning of preparation. Candidates should become familiar with each book’s table of contents, index, chapter structure, illustrations, diagrams, procedures, and terminology. Effective open-book preparation combines technical understanding with the ability to recognize which reference is most likely to contain the information needed for a particular question.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Details\u003c\/h2\u003e\n\n\u003cp\u003eThe Mississippi Welding contractor examination is administered by PSI after the Mississippi State Board of Contractors establishes the candidate’s eligibility. Applicants must complete the appropriate contractor license application before they can schedule the examination.\u003c\/p\u003e\n\n\u003cp\u003eThe Welding examination contains \u003cstrong\u003e60 questions\u003c\/strong\u003e. Candidates receive \u003cstrong\u003e2 hours\u003c\/strong\u003e to complete the exam and must earn a minimum score of \u003cstrong\u003e70 percent\u003c\/strong\u003e to pass.\u003c\/p\u003e\n\n\u003cp\u003eThe official examination content outline includes the following subject areas:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOxyacetylene Welding and Cutting:\u003c\/strong\u003e 11 questions involving equipment, gases, flames, cutting practices, setup, operation, and related safety considerations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlueprint and Plan Reading:\u003c\/strong\u003e 6 questions involving welding symbols, drawings, dimensions, specifications, joint information, and interpretation of project documents.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrazing:\u003c\/strong\u003e 5 questions covering brazing principles, filler metals, joint preparation, heating, fluxes, equipment, and procedures.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipe Welding:\u003c\/strong\u003e 6 questions involving pipe preparation, joint design, alignment, positions, root passes, filler passes, finishing, and procedure selection.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e 10 questions involving metals, electrodes, filler materials, gases, identification, characteristics, selection, and handling.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShielded Metal Arc Welding:\u003c\/strong\u003e 9 questions covering equipment, electrode selection, polarity, joint preparation, technique, positions, and common welding conditions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGas Tungsten Arc Welding:\u003c\/strong\u003e 9 questions involving equipment, shielding gases, tungsten electrodes, current selection, filler metals, technique, and applications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTesting and Inspection:\u003c\/strong\u003e 4 questions addressing weld quality, visual inspection, discontinuities, destructive testing, nondestructive testing, and acceptance considerations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eQuestions may be developed from the listed references and may also require general welding knowledge or familiarity with accepted industry practices. Candidates should understand the material rather than depending entirely on locating a sentence in a book during the examination.\u003c\/p\u003e\n\n\u003cp\u003eThe examination scope is described as unlimited welding work. The Mississippi State Board of Contractors determines whether this classification and examination apply to a particular applicant. Only the Board has authority to assign the examinations required for licensing.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eOpen Book Test\u003c\/h2\u003e\n\n\u003cp\u003eThe Mississippi Welding contractor examination is an \u003cstrong\u003eopen-book test\u003c\/strong\u003e. Candidates are responsible for bringing their approved references to the examination center.\u003c\/p\u003e\n\n\u003cp\u003eApproved books may be highlighted, underlined, and indexed before the examination. References may also be organized with permanent tabs. Temporary tabs, including removable notes and Post-it-style products, are not allowed and must be removed before testing begins.\u003c\/p\u003e\n\n\u003cp\u003eCandidates may not write in the books during the examination. Loose papers, attached notes, unauthorized inserts, and additional materials may not be brought into the testing room with the approved references. Books may be inspected before the examination begins.\u003c\/p\u003e\n\n\u003cp\u003eAn open-book format does not eliminate the need for preparation. With 60 questions and two hours available, candidates have an average of approximately two minutes for each question. Searching through both books for every answer can consume valuable time.\u003c\/p\u003e\n\n\u003cp\u003eUse the references regularly while studying. Learn which chapters address oxyacetylene processes, arc welding, pipe procedures, materials, symbols, testing, and inspection. Practice identifying the subject of a question before opening a book. This approach can reduce unnecessary searching and improve time management.\u003c\/p\u003e\n\n\u003cp\u003eA silent, nonprinting, non-programmable calculator may be used in the examination center. Candidates should review the current PSI Candidate Information Bulletin before test day for testing-center procedures, identification requirements, permitted materials, and examination rules.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eLicensing Steps\u003c\/h2\u003e\n\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReview the Welding classification.\u003c\/strong\u003e Confirm that the specialty classification matches the welding work the applicant or contracting company plans to perform.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete the appropriate application.\u003c\/strong\u003e Submit the commercial or residential contractor application that applies to the intended work and licensing situation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesignate a qualifying individual.\u003c\/strong\u003e The contractor applicant must identify the person who will complete the examinations assigned by the Mississippi State Board of Contractors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProvide supporting documents.\u003c\/strong\u003e Submit the business, ownership, qualifying-party, experience, insurance, and other materials requested in the applicable application.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSubmit the application for review.\u003c\/strong\u003e The Board reviews the submitted information and notifies the applicant of missing or incomplete requirements.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReceive examination eligibility.\u003c\/strong\u003e After the appropriate application requirements are met, the Board notifies PSI that the qualifying individual is eligible to test.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReceive the PSI confirmation.\u003c\/strong\u003e Candidates cannot schedule the examination until PSI sends the eligibility confirmation and registration instructions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStudy the Welding references.\u003c\/strong\u003e Review the examination outline and use the included books to prepare for the eight technical subject areas.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSchedule the examination.\u003c\/strong\u003e Register only for the examination authorized by the Mississippi State Board of Contractors.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTake the examination.\u003c\/strong\u003e Bring acceptable identification and the approved reference books while following PSI’s testing-center rules.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete the remaining requirements.\u003c\/strong\u003e Passing the examination is one part of the licensing process. The Board must approve the complete application before issuing a license.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eState Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe Mississippi State Board of Contractors regulates commercial contractors, residential contractors, roofers, and specialty classifications. Welding is identified as a tested specialty classification involving all aspects of welding, including oxyacetylene welding and cutting, brazing, and pipe welding.\u003c\/p\u003e\n\n\u003cp\u003eApplicants must submit a contractor license application before testing. The Mississippi State Board of Contractors reviews the application and determines which examinations the qualifying individual must complete. PSI administers the examinations after receiving the applicant’s eligibility information from the Board.\u003c\/p\u003e\n\n\u003cp\u003eEach company seeking licensure must designate a qualifying individual. The qualifying individual completes the assigned examination and must maintain the relationship with the licensed company required by the Board. Proof of employment or another accepted relationship may be required.\u003c\/p\u003e\n\n\u003cp\u003eNew applicants receive an eligibility period in which to complete their assigned examinations. Candidates who do not pass during that period may be required to submit a new application before receiving another testing authorization.\u003c\/p\u003e\n\n\u003cp\u003eMississippi contractor applicants must also complete the state’s Law and Business Management examination unless the Board determines that another rule applies. This product contains the Welding trade-exam references only. The Mississippi business and law book is not included.\u003c\/p\u003e\n\n\u003cp\u003ePassing the Welding examination does not automatically issue a contractor license. Applicants must satisfy the complete licensing process, including all applicable business, documentation, qualifying-party, examination, and Board-review requirements.\u003c\/p\u003e\n\n\u003cp\u003eAfter licensing, contractors must operate within the scope of the classification issued by the Board. The Welding classification should not be represented as authorization to perform unrelated contracting work outside its approved scope.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eReference Books\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n    \u003cstrong\u003eModern Welding, 2013, 11th Edition\u003c\/strong\u003e\u003cbr\u003e\n    \u003cspan\u003eThis comprehensive welding reference covers welding processes, equipment, safety, metals, joint design, blueprint interpretation, welding symbols, electrodes, filler metals, oxyfuel welding, cutting, brazing, shielded metal arc welding, gas tungsten arc welding, inspection, and related fabrication practices. It supports preparation across most of the official Mississippi Welding examination subject areas.\u003c\/span\u003e\n  \u003c\/li\u003e\n  \u003cli\u003e\n    \u003cstrong\u003ePipe Welding Procedures, 2003\u003c\/strong\u003e\u003cbr\u003e\n    \u003cspan\u003eThis specialized reference focuses on pipe welding methods and field procedures. It supports study of pipe preparation, alignment, joint design, positions, tack welding, root passes, filler passes, finishing techniques, electrodes, welding variables, troubleshooting, and procedures used to produce sound pipe welds.\u003c\/span\u003e\n  \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe two references serve complementary purposes. \u003cem\u003eModern Welding\u003c\/em\u003e provides broad coverage of welding theory, processes, materials, equipment, safety, and inspection. \u003cem\u003ePipe Welding Procedures\u003c\/em\u003e provides more focused preparation for pipe joints, positions, passes, and working procedures.\u003c\/p\u003e\n\n\u003cp\u003eCandidates should avoid studying the books as isolated titles. Use the examination outline to connect topics from both references. A question involving pipe materials, electrode selection, joint preparation, or inspection may require information that appears across both books.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Room Approved Books\u003c\/h2\u003e\n\n\u003cp\u003eThe following references are approved for use during the Mississippi Welding contractor examination:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eModern Welding, 2013, 11th Edition\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003ePipe Welding Procedures, 2003\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCandidates are responsible for bringing their own books to the testing center. The approved references may be highlighted, underlined, and indexed before the examination. Permanent tabs are permitted, but temporary tabs and removable notes are not allowed.\u003c\/p\u003e\n\n\u003cp\u003eThe books may not contain loose papers, attached study sheets, unauthorized inserts, or other additional materials. Candidates may not write in the references during the examination session.\u003c\/p\u003e\n\n\u003cp\u003eStudy with the same copies that will be taken to the testing center. Familiarity with the page layout, index terms, illustrations, chapter order, and location of important subjects can improve open-book navigation.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eTest Information and Study Materials\u003c\/h2\u003e\n\n\u003cp\u003eBegin preparation by dividing the examination into its eight content areas. Materials and oxyacetylene welding and cutting account for 21 of the 60 questions, making them important areas of study. Shielded metal arc welding and gas tungsten arc welding together account for another 18 questions.\u003c\/p\u003e\n\n\u003cp\u003eUse \u003cem\u003eModern Welding\u003c\/em\u003e to review oxyfuel equipment, flame adjustment, cutting, welding processes, electrical principles, polarity, electrode classifications, shielding gases, joint types, positions, metals, symbols, and inspection practices. Become familiar with the diagrams and terminology used throughout the book.\u003c\/p\u003e\n\n\u003cp\u003eUse \u003cem\u003ePipe Welding Procedures\u003c\/em\u003e to strengthen preparation for pipe joints and field procedures. Review pipe alignment, beveling, root openings, tack welds, welding positions, root-pass control, filler passes, cover passes, electrode manipulation, and common pipe-welding problems.\u003c\/p\u003e\n\n\u003cp\u003eBlueprint and plan-reading preparation should include welding symbols, dimensions, joint designs, reference lines, arrow-side information, other-side information, finish symbols, and supplementary symbols. Practice translating drawing information into the welding procedure or joint configuration it represents.\u003c\/p\u003e\n\n\u003cp\u003eFor materials preparation, review base metals, filler metals, electrodes, gases, fluxes, and material characteristics. Understand how material type and thickness can affect process selection, joint preparation, current, polarity, electrode choice, preheating, and welding technique.\u003c\/p\u003e\n\n\u003cp\u003eTesting and inspection preparation should include visual examination, weld profiles, penetration, fusion, porosity, undercut, overlap, cracks, inclusions, and other discontinuities. Learn the purpose of common destructive and nondestructive inspection methods.\u003c\/p\u003e\n\n\u003cp\u003eComplete practice questions under timed conditions. Answer familiar questions first, mark questions requiring reference research, and return to them after completing the initial pass. This can help preserve time for more difficult items.\u003c\/p\u003e\n\n\u003cp\u003eReview every missed question. Determine whether the error came from limited technical knowledge, misreading a symbol, selecting the wrong process, confusing electrode information, overlooking a procedure step, or taking too long to locate the answer.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow Contractor Exam Prep Helps You Reach Your Goal\u003c\/h2\u003e\n\n\u003cp\u003eContractor Exam Prep supports Mississippi Welding candidates through organized study guidance, trade-focused review, practice-oriented preparation, and reference-navigation strategies. A focused two-book package gives candidates access to the technical foundation associated with the examination without requiring them to search for each title separately.\u003c\/p\u003e\n\n\u003cp\u003eOrganized preparation helps divide the material into manageable subjects. Candidates can study oxyacetylene welding, cutting, blueprints, brazing, pipe welding, materials, shielded metal arc welding, gas tungsten arc welding, testing, and inspection in separate review sessions.\u003c\/p\u003e\n\n\u003cp\u003ePractice-oriented preparation helps candidates move beyond passive reading. Working through questions and technical scenarios can reveal weak areas, improve interpretation, and strengthen the ability to apply welding principles.\u003c\/p\u003e\n\n\u003cp\u003eReference-navigation practice is important for the open-book format. Candidates should know which book applies to each topic and how to use indexes, tables of contents, diagrams, chapter headings, and technical terms efficiently.\u003c\/p\u003e\n\n\u003cp\u003eA consistent study structure can also build confidence. Repeated review, timed practice, and familiarity with the books help candidates approach exam day with a clearer plan and stronger command of the material.\u003c\/p\u003e\n\n\u003cp\u003eNo book package can guarantee a passing examination score, testing eligibility, or contractor license. Results depend on the candidate’s knowledge, preparation, application status, time management, and examination performance.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eFAQ Section\u003c\/h2\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat books are included in the Mississippi Welding Contractor Exam Book Package?\u003c\/h2\u003e\n\n\u003cp\u003eThe package includes \u003cem\u003eModern Welding\u003c\/em\u003e, 2013, 11th Edition, and \u003cem\u003ePipe Welding Procedures\u003c\/em\u003e, 2003.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow many questions are on the Mississippi Welding exam?\u003c\/h2\u003e\n\n\u003cp\u003eThe examination contains 60 questions. Candidates receive two hours and must earn a minimum score of 70 percent.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eIs the Mississippi Welding examination open book?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Candidates may bring the two approved references into the testing center, subject to PSI’s current reference-material rules.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat subjects are covered on the examination?\u003c\/h2\u003e\n\n\u003cp\u003eThe exam covers oxyacetylene welding and cutting, blueprint and plan reading, brazing, pipe welding, materials, shielded metal arc welding, gas tungsten arc welding, and testing and inspection.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eAre these books highlighted and tabbed?\u003c\/h2\u003e\n\n\u003cp\u003eNo. Highlighting and permanent tabs are not listed as part of this standard book package.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes this package include an online course?\u003c\/h2\u003e\n\n\u003cp\u003eNo. This listing includes the two Welding trade-exam reference books only.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes the package include Mississippi business and law preparation?\u003c\/h2\u003e\n\n\u003cp\u003eNo. The Mississippi Law and Business Management reference and course are not included in this trade book package.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eCan I highlight and tab the books myself?\u003c\/h2\u003e\n\n\u003cp\u003eApproved references may be highlighted, underlined, and indexed before the exam. Permanent tabs are permitted, while temporary tabs and removable notes are prohibited.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eDo I need Board approval before scheduling the examination?\u003c\/h2\u003e\n\n\u003cp\u003eYes. The Mississippi State Board of Contractors must establish the qualifying individual’s eligibility before PSI permits scheduling.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat work is covered by the Welding classification?\u003c\/h2\u003e\n\n\u003cp\u003eThe specialty classification involves all aspects of welding, including oxyacetylene welding and cutting, brazing, and pipe welding.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes purchasing the books guarantee that I will pass?\u003c\/h2\u003e\n\n\u003cp\u003eNo. The books provide the approved technical references, but examination results depend on the candidate’s knowledge, study effort, reference-navigation skills, time management, and performance.\u003c\/p\u003e\n\n","brand":"1 Exam Prep","offers":[{"title":"Book Package","offer_id":45919399182389,"sku":null,"price":250.0,"currency_code":"USD","in_stock":true},{"title":"Highlighted \u0026 Tabbed Book Package [+$100]","offer_id":45919399215157,"sku":null,"price":350.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2522\/1688\/files\/MS-WELDING-BOOK.jpg?v=1787552772","url":"https:\/\/contractorexampreps.com\/products\/mississippi-welding-contractor-exam-book-package","provider":"Contractor Exam Preps","version":"1.0","type":"link"}