{"product_id":"icc-fuel-gas-inspector-fg-exam-online-practice-questions","title":"ICC Fuel Gas Inspector - FG Exam - Online Practice Questions","description":"\u003ch1 style=\"color: #d32f2f;\"\u003eICC Fuel Gas Inspector - FG Exam - Online Practice Questions\u003c\/h1\u003e\n\n\u003cp\u003ePrepare for the \u003cstrong\u003eICC Fuel Gas Inspector FG certification exam\u003c\/strong\u003e with online practice questions designed to strengthen fuel-gas code knowledge, improve inspection-focused problem solving, and develop faster reference-navigation skills using the 2021 International Fuel Gas Code. This preparation product includes \u003cstrong\u003e3 months of access\u003c\/strong\u003e, giving you time to organize study around general requirements, inspection and testing, venting, gas piping, combustion air, and specialty gas systems.\u003c\/p\u003e\n\n\u003cp\u003eThe International Code Council Fuel Gas Inspector certification is designed for professionals responsible for inspecting fuel-gas piping systems, gas-fired equipment and appliances, and venting systems for compliance with applicable codes and standards. Inspectors need to understand how piping systems are sized and installed, how gas-fired equipment is protected and connected, how combustion air is provided, and how venting systems are selected and installed.\u003c\/p\u003e\n\n\u003cp\u003eThis preparation product uses the \u003cstrong\u003eInternational Fuel Gas Code, 2021\u003c\/strong\u003e as its primary reference. The IFGC addresses fuel-gas piping, appliance installation, combustion air, chimneys and vents, specialty gases, testing, system protection, materials, clearances, and related installation requirements.\u003c\/p\u003e\n\n\u003cp\u003eEffective preparation requires more than reading the code from beginning to end. Candidates should become familiar with how the IFGC is organized, recognize which chapter or section applies to a particular inspection condition, and develop the ability to find tables, definitions, sizing criteria, exceptions, and installation requirements efficiently.\u003c\/p\u003e\n\n\u003cp\u003eThe online practice questions support active learning. Candidates can use each question to identify the fuel-gas topic, locate the applicable requirement, apply the code to an inspection scenario, and reinforce both technical knowledge and open-book test skills.\u003c\/p\u003e\n\n\u003cdiv style=\"border: 3px solid #d32f2f; padding: 20px; margin: 25px 0; background-color: #fff7f7;\"\u003e\n  \u003ch2 style=\"color: #d32f2f; margin-top: 0;\"\u003eWhat You Get\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOnline Practice Questions:\u003c\/strong\u003e Practice-oriented preparation for the ICC Fuel Gas Inspector FG examination.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCourse Access:\u003c\/strong\u003e 3 months of access included.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eIFGC-Focused Review:\u003c\/strong\u003e Study major fuel-gas inspection topics using the 2021 International Fuel Gas Code.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePiping and Sizing Practice:\u003c\/strong\u003e Reinforce gas-piping materials, installation, pressure control, and sizing requirements.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCombustion Air and Venting Review:\u003c\/strong\u003e Practice requirements involving combustion air, vents, connectors, chimneys, and gas-fired appliances.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eReference Navigation Practice:\u003c\/strong\u003e Build familiarity with locating IFGC provisions, tables, definitions, exceptions, and sizing requirements efficiently.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eExam Details\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eICC Fuel Gas Inspector certification is Exam FG\u003c\/strong\u003e. The examination contains \u003cstrong\u003e60 multiple-choice questions\u003c\/strong\u003e and has a \u003cstrong\u003e2-hour time limit\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe official ICC Fuel Gas Inspector content outline divides the examination into six major areas:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\u003cstrong\u003eGeneral Requirements and Administration – 27%\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eInspection and Testing – 7%\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eVenting Materials, Installation, and Sizing – 17%\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003ePiping Systems, Materials, Installation, and Sizing – 22%\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eCombustion Air – 20%\u003c\/strong\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003eTypes of Gas and Specialty Gas Systems – 7%\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eGeneral Requirements and Administration\u003c\/strong\u003e is the largest category at 27%. This section includes the authority of the inspector, permitting and documentation, appliance and equipment clearances, guards, and methods used to reduce required clearances.\u003c\/p\u003e\n\n\u003cp\u003eClearances and protection are important inspection subjects. Fuel Gas Inspectors must evaluate whether appliances, equipment, chimneys, vents, and connectors maintain required clearances from combustible materials and whether access, labeling, and guarding requirements have been satisfied.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePiping Systems, Materials, Installation, and Sizing\u003c\/strong\u003e represent 22% of the exam. Candidates should prepare for questions involving approved piping materials, identification, underground piping, supports, protection, fittings, valves, appliance connectors, operating pressure, flow control, regulators, and gas-pipe sizing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCombustion Air\u003c\/strong\u003e accounts for 20%. Candidates need to understand how to determine whether adequate combustion air is available for gas-fired appliances, how indoor and outdoor air methods are applied, and how required openings and ducts are sized and located.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eVenting Materials, Installation, and Sizing\u003c\/strong\u003e represent 17% of the examination. This category includes acceptable venting materials, installation of vents and connectors, and the use of sizing provisions for vent systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInspection and Testing\u003c\/strong\u003e represent 7%. Candidates should understand testing procedures, leak-detection requirements, test durations, and purging procedures associated with fuel-gas piping systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTypes of Gas and Specialty Gas Systems\u003c\/strong\u003e represent 7%. This area includes installation of piping, tanks, cylinders, and containers for gas systems, conditions involving fuel-source conversions, and specialty systems such as hydrogen and compressed natural gas.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eOpen Book Test\u003c\/h2\u003e\n\n\u003cp\u003eThe ICC Fuel Gas Inspector FG examination is an \u003cstrong\u003eopen book test\u003c\/strong\u003e. Candidates have two hours to complete 60 multiple-choice questions and must follow current ICC examination rules regarding permitted references and materials.\u003c\/p\u003e\n\n\u003cp\u003eThe open-book format makes efficient code navigation an important part of preparation. With an average of approximately two minutes per question, candidates should become familiar with the structure of the 2021 International Fuel Gas Code rather than depending on broad searches for every answer.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003e2021 International Fuel Gas Code\u003c\/strong\u003e should become a working reference during preparation. Candidates should understand where to locate general regulations, gas-piping requirements, combustion-air provisions, venting requirements, appliance-related rules, specialty gas provisions, definitions, and applicable tables.\u003c\/p\u003e\n\n\u003cp\u003eA question involving gas-pipe sizing should immediately direct attention toward fuel-gas piping provisions and applicable sizing tables. A question involving a vent connector should lead toward venting requirements. A combustion-air question should direct the candidate toward methods for determining required volume, opening size, and duct sizing.\u003c\/p\u003e\n\n\u003cp\u003eInspection questions may also involve several requirements at once. For example, a gas-fired appliance installation may require review of equipment clearances, combustion air, venting, gas piping, shutoff valves, connectors, and access.\u003c\/p\u003e\n\n\u003cp\u003ePractice questions are especially useful when treated as reference-navigation exercises. After answering, locate the applicable code provision and review nearby requirements. This helps build familiarity with the IFGC while reinforcing how related fuel-gas provisions work together.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eLicensing Steps\u003c\/h2\u003e\n\n\u003cp\u003eThe ICC Fuel Gas Inspector FG is a professional certification rather than a universal state contractor license. Requirements for working as an official fuel-gas inspector vary by state, county, municipality, employer, and authority having jurisdiction.\u003c\/p\u003e\n\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIdentify the FG certification.\u003c\/strong\u003e Confirm that the ICC Fuel Gas Inspector credential matches your professional, employer, or jurisdictional requirement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSelect the correct code cycle.\u003c\/strong\u003e This preparation product uses the 2021 International Fuel Gas Code.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReview the official examination content.\u003c\/strong\u003e Organize study around General Requirements and Administration, Inspection and Testing, Venting, Piping Systems, Combustion Air, and Specialty Gas Systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStudy the 2021 IFGC.\u003c\/strong\u003e Become familiar with the organization of the code and the major provisions affecting fuel-gas systems and appliances.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePractice gas-piping and venting calculations.\u003c\/strong\u003e Spend additional time with sizing tables and situations that require selecting the correct system configuration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUse the online practice questions.\u003c\/strong\u003e Work through inspection-oriented scenarios and revisit weaker code areas throughout the 3-month access period.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRegister for the ICC examination.\u003c\/strong\u003e Purchase and schedule the appropriate FG exam and code cycle through ICC's credentialing process.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete the examination.\u003c\/strong\u003e Take the 60-question open-book exam within the 2-hour testing period.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eComplete local requirements when applicable.\u003c\/strong\u003e Follow any additional state or local qualifications required for official inspection authority or employment.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eState Requirements\u003c\/h2\u003e\n\n\u003cp\u003eThe ICC Fuel Gas Inspector FG credential is a \u003cstrong\u003enational ICC certification\u003c\/strong\u003e. It is not tied to one specific state licensing program, and earning the certification does not automatically authorize a person to perform official fuel-gas inspections in every jurisdiction.\u003c\/p\u003e\n\n\u003cp\u003eStates, cities, counties, municipalities, and other authorities having jurisdiction may establish their own qualifications for fuel-gas inspectors. Requirements may include ICC certification, state certification, experience, education, continuing education, employment through an approved inspection agency, or other qualifications.\u003c\/p\u003e\n\n\u003cp\u003eCandidates should distinguish between earning the ICC FG certification and meeting the employment or regulatory requirements of the jurisdiction where they intend to work. ICC evaluates technical fuel-gas inspection knowledge, while local authorities determine who may perform official inspections.\u003c\/p\u003e\n\n\u003cp\u003eThe Fuel Gas Inspector scope includes verifying the design, installation, and inspection of fuel-gas piping systems and equipment, gas-fired appliances, and venting systems. It also includes verification of pipe sizing, materials, protection, testing, combustion air, equipment approval, venting, and proper clearances.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eReference Books\u003c\/h2\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInternational Fuel Gas Code, 2021\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe primary reference for this FG preparation product. It supports study of gas-piping materials and sizing, equipment and appliance installation, testing and purging, combustion air, chimneys and vents, clearances, gas-system protection, specialty gases, and other fuel-gas inspection requirements.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eTest Information and Study Materials\u003c\/h2\u003e\n\n\u003cp\u003eThis online practice-question product includes \u003cstrong\u003e3 months of access\u003c\/strong\u003e. The access period gives candidates time to organize preparation by official content area, revisit difficult subjects, and repeatedly practice navigating the 2021 International Fuel Gas Code.\u003c\/p\u003e\n\n\u003cp\u003eBegin with \u003cstrong\u003eGeneral Requirements and Administration\u003c\/strong\u003e because it represents 27% of the examination. Review inspector authority, permitting, documentation, access, appliance clearances, equipment clearances, vent and chimney clearances, connector clearances, guarding, and approved clearance-reduction methods.\u003c\/p\u003e\n\n\u003cp\u003ePay close attention to equipment location and protection. The official content outline gives significant weight to guards and clearances, so candidates should become comfortable identifying installation conditions where protection or minimum separation from combustible materials is required.\u003c\/p\u003e\n\n\u003cp\u003eNext, focus on \u003cstrong\u003ePiping Systems, Materials, Installation, and Sizing\u003c\/strong\u003e. Review approved gas-piping materials, identification requirements, underground piping, corrosion protection, supports, fittings, valves, appliance connectors, regulator requirements, system pressure, and sizing tables.\u003c\/p\u003e\n\n\u003cp\u003eGas-pipe sizing deserves regular practice. Candidates should learn how to identify the type of gas, system pressure, developed length, connected load, and applicable table before determining pipe size. Efficient use of tables can be especially important during an open-book examination.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCombustion Air\u003c\/strong\u003e represents 20% of the exam and should receive substantial study attention. Review indoor combustion-air methods, communication between spaces, outdoor air methods, opening locations, opening sizes, duct requirements, and conditions that affect available combustion air.\u003c\/p\u003e\n\n\u003cp\u003eFor \u003cstrong\u003eVenting Materials, Installation, and Sizing\u003c\/strong\u003e, study acceptable vent materials, vent connectors, chimney connections, support, clearances, installation, termination, and sizing. Candidates should become comfortable selecting the appropriate venting provisions for the appliance and system configuration described.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eInspection and Testing\u003c\/strong\u003e requires familiarity with piping-system testing and purging. Review the procedures used before systems are placed into service and how leak detection and purging requirements affect safe system operation.\u003c\/p\u003e\n\n\u003cp\u003eFor \u003cstrong\u003eTypes of Gas and Specialty Gas Systems\u003c\/strong\u003e, review piping, tanks, cylinders, containers, fuel-source changes, and specialty systems addressed by the IFGC. The official examination outline specifically identifies hydrogen and compressed natural gas among specialty gas topics.\u003c\/p\u003e\n\n\u003cp\u003eTimed practice can help build an effective exam pace. The examination allows 120 minutes for 60 questions, averaging approximately two minutes per question. Some questions may be answered quickly, while sizing or multi-step code-navigation questions may require more time.\u003c\/p\u003e\n\n\u003cp\u003eWhen reviewing practice questions, identify why each missed answer occurred. A candidate may understand the technical concept but choose the wrong sizing table, overlook an exception, or search the wrong chapter. Correcting the navigation process can be as important as reviewing the technical rule itself.\u003c\/p\u003e\n\n\u003cp\u003eUse the 3-month access period to rotate through the major content areas. Spending all study time on gas piping while neglecting clearances, combustion air, venting, testing, or specialty systems can leave important gaps in preparation.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow Contractor Exam Prep Helps You Reach Your Goal\u003c\/h2\u003e\n\n\u003cp\u003eContractor Exam Prep supports Fuel Gas Inspector candidates through organized study guidance, trade-focused review, practice-oriented preparation, reference navigation, and confidence-building study structure. The ICC Fuel Gas Inspector FG Online Practice Questions are designed to help candidates actively work with the 2021 International Fuel Gas Code rather than relying only on passive reading.\u003c\/p\u003e\n\n\u003cp\u003ePractice questions encourage candidates to identify the fuel-gas inspection issue, determine where the applicable requirement is located, navigate to the correct IFGC provision or table, and apply the code to the condition presented.\u003c\/p\u003e\n\n\u003cp\u003eThe included \u003cstrong\u003e3 months of access\u003c\/strong\u003e gives candidates time to build a consistent study routine. You can focus on general requirements, gas piping, venting, combustion air, testing, purging, and specialty gases while returning to weaker areas throughout the access period.\u003c\/p\u003e\n\n\u003cp\u003eFuel-gas inspection frequently involves several code requirements working together. A single appliance may require the inspector to evaluate gas-pipe sizing, shutoff and connector installation, combustion air, venting, clearances, access, guarding, and equipment approval. Structured practice helps candidates connect these requirements instead of treating them as isolated rules.\u003c\/p\u003e\n\n\u003cp\u003eReference-navigation practice is especially valuable for an open-book exam. Knowing that a requirement exists is useful, but being able to locate and confirm the applicable section or sizing table quickly can make preparation more effective under a two-hour testing limit.\u003c\/p\u003e\n\n\u003cp\u003eContractor Exam Prep provides structured preparation designed to support stronger fuel-gas code familiarity, more efficient reference navigation, better sizing practice, and organized exam study without guaranteeing a passing score, certification, employment, or approval by any jurisdiction.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat is the ICC FG exam?\u003c\/h2\u003e\n\n\u003cp\u003eThe FG is the ICC \u003cstrong\u003eFuel Gas Inspector\u003c\/strong\u003e certification examination. It evaluates knowledge used to inspect fuel-gas piping systems, gas-fired equipment and appliances, combustion air, venting systems, and related installations.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow many questions are on the ICC Fuel Gas Inspector exam?\u003c\/h2\u003e\n\n\u003cp\u003eThe FG examination contains \u003cstrong\u003e60 multiple-choice questions\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow much time is allowed for the FG exam?\u003c\/h2\u003e\n\n\u003cp\u003eCandidates have \u003cstrong\u003e2 hours\u003c\/strong\u003e to complete the examination.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eIs the ICC Fuel Gas Inspector FG exam open book?\u003c\/h2\u003e\n\n\u003cp\u003eYes. The ICC Fuel Gas Inspector FG examination is an \u003cstrong\u003eopen book test\u003c\/strong\u003e. Candidates must follow current ICC requirements regarding permitted references and examination materials.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhich code is used for this preparation product?\u003c\/h2\u003e\n\n\u003cp\u003eThis product uses the \u003cstrong\u003eInternational Fuel Gas Code, 2021\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhat is the largest section of the FG exam?\u003c\/h2\u003e\n\n\u003cp\u003e\u003cstrong\u003eGeneral Requirements and Administration\u003c\/strong\u003e is the largest major content area and represents \u003cstrong\u003e27%\u003c\/strong\u003e of the examination.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes the FG exam cover gas-pipe sizing?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Piping Systems, Materials, Installation, and Sizing represent 22% of the examination, and gas-pipe sizing is specifically included in the official content outline.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes the Fuel Gas Inspector exam cover combustion air?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Combustion Air represents \u003cstrong\u003e20%\u003c\/strong\u003e of the exam and includes indoor volume, openings, ducts, sizing, and exterior-air methods.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes the FG exam cover venting?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Venting Materials, Installation, and Sizing represent \u003cstrong\u003e17%\u003c\/strong\u003e of the official examination content.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes the exam include testing and purging?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Inspection and Testing include testing procedures, detection procedures, test durations, and purging requirements.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eDoes the exam cover specialty gas systems?\u003c\/h2\u003e\n\n\u003cp\u003eYes. Types of Gas and Specialty Gas Systems represent 7% of the exam and include installations involving gas-system containers and specialty gases such as hydrogen and compressed natural gas.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow long do I have access to the online practice questions?\u003c\/h2\u003e\n\n\u003cp\u003eThis product includes \u003cstrong\u003e3 months of access\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eIs the ICC FG certification a contractor license?\u003c\/h2\u003e\n\n\u003cp\u003eNo. The ICC Fuel Gas Inspector FG is a professional certification. State and local jurisdictions may establish separate qualifications for official inspector employment or authority.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eDo I need to memorize the entire 2021 IFGC?\u003c\/h2\u003e\n\n\u003cp\u003eNo. Because the examination is open book, preparation should focus on understanding fuel-gas concepts and becoming efficient at locating applicable sections, tables, definitions, exceptions, and sizing provisions.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eHow should I study for the ICC FG exam?\u003c\/h2\u003e\n\n\u003cp\u003eStudy by official content area, devote substantial time to General Requirements, Piping Systems, Combustion Air, and Venting, practice sizing-table navigation, and complete timed practice questions throughout the 3-month access period.\u003c\/p\u003e\n\n\u003ch2 style=\"color: #d32f2f;\"\u003eWhy are online practice questions useful for the FG exam?\u003c\/h2\u003e\n\n\u003cp\u003eOnline practice questions help reinforce fuel-gas code knowledge, identify weaker subjects, improve familiarity with inspection scenarios, strengthen sizing skills, and develop more efficient IFGC reference-navigation habits.\u003c\/p\u003e\n\n","brand":"Contractor Exam Preps","offers":[{"title":"Default Title","offer_id":46001731239989,"sku":null,"price":84.99,"currency_code":"USD","in_stock":true}],"url":"https:\/\/contractorexampreps.com\/products\/icc-fuel-gas-inspector-fg-exam-online-practice-questions","provider":"Contractor Exam Preps","version":"1.0","type":"link"}